Hi Rob,
On 2020/04/29 1:20, Rob Herring wrote:
On Thu, Apr 16, 2020 at 02:12:15PM +0900, Kunihiko Hayashi wrote:
Convert the UniPhier thermal monitor binding to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
---
.../thermal/socionext,uniphier-thermal.yaml | 57 +++++++++++++++++++
.../bindings/thermal/uniphier-thermal.txt | 65 ----------------------
2 files changed, 57 insertions(+), 65 deletions(-)
create mode 100644
Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
delete mode 100644
Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
diff --git
a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
new file mode 100644
index 0000000..bdddc5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier thermal monitor
+
+description: |
+ This describes the devicetree bindings for thermal monitor supported by
+ PVT(Process, Voltage and Temperature) monitoring unit implemented on
+ Socionext UniPhier SoCs.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunih...@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pxs2-thermal
+ - socionext,uniphier-ld20-thermal
+ - socionext,uniphier-pxs3-thermal
+
+ interrupts:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 0
+
+ socionext,tmod-calibration:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ A pair of calibrated values referred from PVT, in case that the values
+ aren't set on SoC, like a reference board.
So?:
maxItems: 2
Okay, I'll add that in v2.
Thank you,
---
Best Regards
Kunihiko Hayashi
