[PATCH 2/2] reset: imx7: add the cm4 reset for i.MX8MQ

[peng . fan]

From: Peng Fan <peng....@nxp.com>

Add the cm4 reset used by the remoteproc driver

Signed-off-by: Peng Fan <peng....@nxp.com>
---
 drivers/reset/reset-imx7.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index d170fe663210..87b6e2d46fb6 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -178,6 +178,9 @@ static const struct imx7_src_signal 
imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
        [IMX8MQ_RESET_A53_SOC_DBG_RESET]        = { SRC_A53RCR0, BIT(20) },
        [IMX8MQ_RESET_A53_L2RESET]              = { SRC_A53RCR0, BIT(21) },
        [IMX8MQ_RESET_SW_NON_SCLR_M4C_RST]      = { SRC_M4RCR, BIT(0) },
+       [IMX8MQ_RESET_SW_M4C_RST]               = { SRC_M4RCR, BIT(1) },
+       [IMX8MQ_RESET_SW_M4P_RST]               = { SRC_M4RCR, BIT(2) },
+       [IMX8MQ_RESET_M4_ENABLE]                = { SRC_M4RCR, BIT(3) },
        [IMX8MQ_RESET_OTG1_PHY_RESET]           = { SRC_USBOPHY1_RCR, BIT(0) },
        [IMX8MQ_RESET_OTG2_PHY_RESET]           = { SRC_USBOPHY2_RCR, BIT(0) },
        [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N]    = { SRC_MIPIPHY_RCR, BIT(1) },
@@ -238,6 +241,7 @@ static int imx8mq_reset_set(struct reset_controller_dev 
*rcdev,
        case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
        case IMX8MQ_RESET_MIPI_DSI_RESET_N:     /* fallthrough */
        case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N:        /* fallthrough */
+       case IMX8MQ_RESET_M4_ENABLE:
                value = assert ? 0 : bit;
                break;
        }
-- 
2.16.4