Hi Paul, > Am 24.01.2021 um 10:47 schrieb H. Nikolaus Schaller <h...@goldelico.com>: > > Hi Paul, > >> Am 24.01.2021 um 10:43 schrieb Paul Cercueil <p...@crapouillou.net>: >> >> Hi Nikolaus, >> >> Le dim. 24 janv. 2021 à 10:30, H. Nikolaus Schaller <h...@goldelico.com> a >> écrit : >>> Hi Paul, >>> we observed the same issue on the jz4730 (which is almost identical >>> to the jz4740 wrt. LCDC) and our solution [1] was simpler. >>> It leaves the hwdesc f0 and f1 as they are and just takes f1 for really >>> programming the first DMA descriptor if there is no OSD. >> >> Disagreed. With your solution, it ends up using priv->f1 plane with >> hwdesc_f0. That's very confusing. > > It is a tradeoff between code simplicity and confusion. Indeed difficult to > decide. Fortunately I don't have to :) > >> >>> We have tested on jz4730 and jz4780. >> >> Could I get a tested-by then? :) > > I'll test with our tree and test both SoC in the next days and give feedback.
Ok, works on both devices: a) Skytone Alpha 400 compatible Letux 400 with not-yet-upstream jz4730 and internal panel b) CI20 with external HDMI (tablet) and our not-yet-upstream HDMI code So the hwdesc handling is as ok as it was with our patch. I'll keep a copy of yours in our tree until it arrives upstream. Tested-by: H. Nikolaus Schaller <h...@goldelico.com> BR and thanks, Nikolaus > > BR and thanks, > Nikolaus > >> >> Cheers, >> -Paul >> >>> Maybe you want to consider that. Then I can officially post it. >>> [1] >>> https://github.com/goldelico/letux-kernel/commit/3be1de5fdabf2cc1c17f198ded3328cc6e4b9844 >>>> Am 24.01.2021 um 09:55 schrieb Paul Cercueil <p...@crapouillou.net>: >>>> Even though the JZ4740 did not have the OSD mode, it had (according to >>>> the documentation) two DMA channels, but there is absolutely no >>>> information about how to select the second DMA channel. >>>> Make the ingenic-drm driver work in non-OSD mode by using the >>>> foreground0 plane (which is bound to the DMA0 channel) as the primary >>>> plane, instead of the foreground1 plane, which is the primary plane >>>> when in OSD mode. >>>> Fixes: 3c9bea4ef32b ("drm/ingenic: Add support for OSD mode") >>>> Cc: <sta...@vger.kernel.org> # v5.8+ >>>> Signed-off-by: Paul Cercueil <p...@crapouillou.net> >>>> Acked-by: Daniel Vetter <daniel.vet...@ffwll.ch> >>>> --- >>>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++++---- >>>> 1 file changed, 7 insertions(+), 4 deletions(-) >>>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c >>>> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c >>>> index b23011c1c5d9..59ce43862e16 100644 >>>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c >>>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c >>>> @@ -554,7 +554,7 @@ static void ingenic_drm_plane_atomic_update(struct >>>> drm_plane *plane, >>>> height = state->src_h >> 16; >>>> cpp = state->fb->format->cpp[0]; >>>> - if (priv->soc_info->has_osd && plane->type == >>>> DRM_PLANE_TYPE_OVERLAY) >>>> + if (!priv->soc_info->has_osd || plane->type == >>>> DRM_PLANE_TYPE_OVERLAY) >>>> hwdesc = &priv->dma_hwdescs->hwdesc_f0; >>>> else >>>> hwdesc = &priv->dma_hwdescs->hwdesc_f1; >>> we just replace this with >>> if (priv->soc_info->has_osd && plane->type != >>> DRM_PLANE_TYPE_OVERLAY) >>> hwdesc = &priv->dma_hwdescs->hwdesc_f1; >>> else >>> hwdesc = &priv->dma_hwdescs->hwdesc_f0; >>> and the remainder can stay as is. >>>> @@ -826,6 +826,7 @@ static int ingenic_drm_bind(struct device *dev, bool >>>> has_components) >>>> const struct jz_soc_info *soc_info; >>>> struct ingenic_drm *priv; >>>> struct clk *parent_clk; >>>> + struct drm_plane *primary; >>>> struct drm_bridge *bridge; >>>> struct drm_panel *panel; >>>> struct drm_encoder *encoder; >>>> @@ -940,9 +941,11 @@ static int ingenic_drm_bind(struct device *dev, bool >>>> has_components) >>>> if (soc_info->has_osd) >>>> priv->ipu_plane = drm_plane_from_index(drm, 0); >>>> - drm_plane_helper_add(&priv->f1, &ingenic_drm_plane_helper_funcs); >>>> + primary = priv->soc_info->has_osd ? &priv->f1 : &priv->f0; >>>> - ret = drm_universal_plane_init(drm, &priv->f1, 1, >>>> + drm_plane_helper_add(primary, &ingenic_drm_plane_helper_funcs); >>>> + >>>> + ret = drm_universal_plane_init(drm, primary, 1, >>>> &ingenic_drm_primary_plane_funcs, >>>> priv->soc_info->formats_f1, >>>> priv->soc_info->num_formats_f1, >>>> @@ -954,7 +957,7 @@ static int ingenic_drm_bind(struct device *dev, bool >>>> has_components) >>>> drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs); >>>> - ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->f1, >>>> + ret = drm_crtc_init_with_planes(drm, &priv->crtc, primary, >>>> NULL, &ingenic_drm_crtc_funcs, NULL); >>>> if (ret) { >>>> dev_err(dev, "Failed to init CRTC: %i\n", ret); >>>> -- >>>> 2.29.2 >>> BR and thanks, >>> Nikolaus >> >> >
