Hi Ray,
> Currently, VBUS draw callback does no action when the > generic PHYs are used. The patches add an additional path > to control charging current through power supply property > POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT. > > Ray Chi (2): > usb: dwc3: add a power supply for current control > usb: dwc3: add an alternate path in vbus_draw callback While using next-20210303 this patchset leads to the following kernel crash on my board: ---- 8< ---- [ 1.392084] VFIO - User Level meta-driver version: 0.3 [ 1.398370] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003a0 [ 1.407552] Mem abort info: [ 1.410479] ESR = 0x96000004 [ 1.413668] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.419217] SET = 0, FnV = 0 [ 1.422413] EA = 0, S1PTW = 0 [ 1.425690] Data abort info: [ 1.428705] ISV = 0, ISS = 0x00000004 [ 1.432715] CM = 0, WnR = 0 [ 1.435821] [00000000000003a0] user address but active_mm is swapper [ 1.442458] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.448274] Modules linked in: [ 1.451469] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-next-20210303-00005-g090e892099db #126 [ 1.461269] Hardware name: Kontron pITX-imx8m (DT) [ 1.466268] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 1.472538] pc : devm_power_supply_get_by_phandle+0xe4/0x148 [ 1.478455] lr : dwc3_probe+0xbac/0xfa0 [ 1.482462] sp : ffff800011f1bb00 [ 1.485918] x29: ffff800011f1bb00 x28: 0000000000000000 [ 1.491467] x27: ffff800011681078 x26: ffff8000115d048c [ 1.497016] x25: ffff0000c089ea00 x24: 0000000000000003 [ 1.502564] x23: ffff0000c089ea00 x22: ffff800011b89948 [ 1.508112] x21: 0000000000000003 x20: 00000000fffffdfb [ 1.513660] x19: ffff0000c03f1080 x18: 00000000000000c0 [ 1.519209] x17: 0000000000000000 x16: 0000000000000000 [ 1.524757] x15: fffffc0000001000 x14: 0000000000000000 [ 1.530306] x13: 0000000000000000 x12: 0000000000000030 [ 1.535853] x11: 0101010101010101 x10: ffff800011f1ba50 [ 1.541402] x9 : ffff0000ff784c70 x8 : 0000000000000010 [ 1.546950] x7 : ffff0000c03a5590 x6 : 0000000000000080 [ 1.552498] x5 : ffff0000c0098000 x4 : 00000000000003a0 [ 1.558047] x3 : ffff800011cb2dc8 x2 : 0000000000000000 [ 1.563596] x1 : 0000000000000001 x0 : 0000000000000000 [ 1.569146] Call trace: [ 1.571700] devm_power_supply_get_by_phandle+0xe4/0x148 [ 1.577248] dwc3_probe+0xbac/0xfa0 [ 1.580890] platform_probe+0x68/0xd8 [ 1.584719] really_probe+0xe4/0x3c0 [ 1.588454] driver_probe_device+0x58/0xb8 [ 1.592733] device_driver_attach+0x74/0x80 [ 1.597100] __driver_attach+0x58/0xe0 [ 1.601016] bus_for_each_dev+0x74/0xc8 [ 1.605020] driver_attach+0x24/0x30 [ 1.608753] bus_add_driver+0x184/0x1e8 [ 1.612758] driver_register+0x64/0x120 [ 1.616764] __platform_driver_register+0x28/0x38 [ 1.621675] dwc3_driver_init+0x1c/0x28 [ 1.625684] do_one_initcall+0x74/0x1d0 [ 1.629691] kernel_init_freeable+0x1d4/0x23c [ 1.634240] kernel_init+0x14/0x118 [ 1.637885] ret_from_fork+0x10/0x30 [ 1.641624] Code: 88027c01 35ffffa2 17fffe96 f9800091 (885f7c82) [ 1.647992] ---[ end trace c6e48cea897d0b0d ]--- [ 1.652833] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.660822] SMP: stopping secondary CPUs [ 1.664921] Kernel Offset: disabled [ 1.668560] CPU features: 0x00240002,2000200c [ 1.673106] Memory Limit: none [ 1.676296] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- ---- 8< ---- After reverting these 2 patches the problem is gone. -- Heiko
