On 2/17/21 2:40 PM, Ansuel Smith wrote:
Use init_common and drop custom init for msm8960. Signed-off-by: Ansuel Smith <ansuels...@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopin...@linaro.org> Warm Regards Thara
--- > drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------ 1 file changed, 1 insertion(+), 51 deletions(-) diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 3f4fc1ffe679..86585f439985 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -173,56 +173,6 @@ static void disable_8960(struct tsens_priv *priv) regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); }-static int init_8960(struct tsens_priv *priv)-{ - int ret, i; - u32 reg_cntl; - - priv->tm_map = dev_get_regmap(priv->dev, NULL); - if (!priv->tm_map) - return -ENODEV; - - /* - * The status registers for each sensor are discontiguous - * because some SoCs have 5 sensors while others have more - * but the control registers stay in the same place, i.e - * directly after the first 5 status registers. - */ - for (i = 0; i < priv->num_sensors; i++) { - if (i >= 5) - priv->sensor[i].status = S0_STATUS_ADDR + 40; - priv->sensor[i].status += i * 4; - } - - reg_cntl = SW_RST; - ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl); - if (ret) - return ret; - - if (priv->num_sensors > 1) { - reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); - reg_cntl &= ~SW_RST; - ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR, - CONFIG_MASK, CONFIG); - } else { - reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); - reg_cntl &= ~CONFIG_MASK_8660; - reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; - } - - reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT; - ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); - if (ret) - return ret; - - reg_cntl |= EN; - ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); - if (ret) - return ret; - - return 0; -} - static int calibrate_8960(struct tsens_priv *priv) { int i; @@ -346,7 +296,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { };static const struct tsens_ops ops_8960 = {- .init = init_8960, + .init = init_common, .calibrate = calibrate_8960, .get_temp = get_temp_8960, .enable = enable_8960,
