Hi, On Thu, Mar 25, 2021 at 11:57 PM <sbh...@codeaurora.org> wrote: > > >>> + max-frequency = <192000000>; > >> Why do you need to specify this? > This helps to avoid lower speed modes running in high clock rate, > and As Veerabhadrarao Badiganti mentioned
Just to be clear, both Stephen and I agree that you should remove "max-frequency" here (see previous discussion). Bjorn is, of course, the file decision maker. However, unless he says "yeah, totally keep it in" I'd suggest dropping it from the next version. > >>> + required-opps = > >>> <&rpmhpd_opp_low_svs>; > >>> + opp-peak-kBps = <1200000 > >>> 76000>; > >>> + opp-avg-kBps = <1200000 > >>> 50000>; > >> Why are the kBps numbers so vastly different than the ones on sc7180 > >> for the same OPP point. That implies: > >> > >> a) sc7180 is wrong. > >> > >> b) This patch is wrong. > >> > >> c) The numbers are essentially random and don't really matter. > >> > >> Can you identify which of a), b), or c) is correct, or propose an > >> alternate explanation of the difference? > >> > > We calculated bus votes values for both sc7180 and sc7280 with ICB tool, > above mentioned values we got for sc7280. I don't know what an ICB tool is. Please clarify. Also: just because a tool spits out numbers that doesn't mean it's correct. Presumably the tool could be wrong or incorrectly configured. We need to understand why these numbers are different. -Doug
