On Sunday, December 02, 2012 06:06:31 PM Michael S. Tsirkin wrote:
> On Tue, Nov 27, 2012 at 06:15:59PM +0800, Jason Wang wrote:
> > This addes multiqueue support to virtio_net driver. In multiple queue
> > modes, the driver expects the number of queue paris is equal to the
> > number of vcpus. To eliminate the contention bettwen vcpus and
> > virtqueues, per-cpu virtqueue pairs were implemented through:
> >
> > - select the txq based on the smp processor id.
> > - smp affinity hint were set to the vcpu that owns the queue pairs.
> >
> > Signed-off-by: Krishna Kumar <krkum...@in.ibm.com>
> > Signed-off-by: Jason Wang <jasow...@redhat.com>
> > ---
> >
> > drivers/net/virtio_net.c | 454
> > ++++++++++++++++++++++++++++++--------- include/uapi/linux/virtio_net.h
> > | 16 ++
> > 2 files changed, 371 insertions(+), 99 deletions(-)
> >
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index 7975133..bcaa6e5 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -84,17 +84,25 @@ struct virtnet_info {
> >
> > struct virtio_device *vdev;
> > struct virtqueue *cvq;
> > struct net_device *dev;
> >
> > - struct napi_struct napi;
> > - struct send_queue sq;
> > - struct receive_queue rq;
> > + struct send_queue *sq;
> > + struct receive_queue *rq;
> >
> > unsigned int status;
> >
> > + /* Max # of queue pairs supported by the device */
> > + u16 max_queue_pairs;
> > +
> > + /* # of queue pairs currently used by the driver */
> > + u16 curr_queue_pairs;
> > +
> >
> > /* I like... big packets and I cannot lie! */
> > bool big_packets;
> >
> > /* Host will merge rx buffers for big packets (shake it! shake it!) */
> > bool mergeable_rx_bufs;
> >
> > + /* Has control virtqueue */
> > + bool has_cvq;
> > +
> >
> > /* enable config space updates */
> > bool config_enable;
> >
> > @@ -126,6 +134,34 @@ struct padded_vnet_hdr {
> >
> > char padding[6];
> >
> > };
> >
> > +static const struct ethtool_ops virtnet_ethtool_ops;
> > +
> > +/*
> > + * Converting between virtqueue no. and kernel tx/rx queue no.
> > + * 0:rx0 1:tx0 2:cvq 3:rx1 4:tx1 ... 2N+1:rxN 2N+2:txN
> > + */
>
> Weird, this isn't what spec v5 says: it says
> 0:rx0 1:tx0 2: rx1 3: tx1 .... vcq
> We can change the spec to match but keeping all rx/tx
> together seems a bit prettier?
Oh, I miss the check of this part in v5. Have a thought about this, if we
change the location of cvq, we may break the support of legacy guest with only
single queue support. Consider we start a vm with 2 queue but boot a signle
queue legacy guest, it may think vq 2 is cvq which indeed is rx1.
>
> > +static int vq2txq(struct virtqueue *vq)
> > +{
> > + int index = virtqueue_get_queue_index(vq);
> > + return index == 1 ? 0 : (index - 2) / 2;
> > +}
> > +
> > +static int txq2vq(int txq)
> > +{
> > + return txq ? 2 * txq + 2 : 1;
> > +}
> > +
> > +static int vq2rxq(struct virtqueue *vq)
> > +{
> > + int index = virtqueue_get_queue_index(vq);
> > + return index ? (index - 1) / 2 : 0;
> > +}
> > +
> > +static int rxq2vq(int rxq)
> > +{
> > + return rxq ? 2 * rxq + 1 : 0;
> > +}
> > +
> >
> > static inline struct skb_vnet_hdr *skb_vnet_hdr(struct sk_buff *skb)
> > {
> >
> > return (struct skb_vnet_hdr *)skb->cb;
> >
> > @@ -166,7 +202,7 @@ static void skb_xmit_done(struct virtqueue *vq)
> >
> > virtqueue_disable_cb(vq);
> >
> > /* We were probably waiting for more output buffers. */
> >
> > - netif_wake_queue(vi->dev);
> > + netif_wake_subqueue(vi->dev, vq2txq(vq));
> >
> > }
> >
> > static void set_skb_frag(struct sk_buff *skb, struct page *page,
> >
> > @@ -503,7 +539,7 @@ static bool try_fill_recv(struct receive_queue *rq,
> > gfp_t gfp)>
> > static void skb_recv_done(struct virtqueue *rvq)
> > {
> >
> > struct virtnet_info *vi = rvq->vdev->priv;
> >
> > - struct receive_queue *rq = &vi->rq;
> > + struct receive_queue *rq = &vi->rq[vq2rxq(rvq)];
> >
> > /* Schedule NAPI, Suppress further interrupts if successful. */
> > if (napi_schedule_prep(&rq->napi)) {
> >
> > @@ -650,7 +686,8 @@ static int xmit_skb(struct send_queue *sq, struct
> > sk_buff *skb)>
> > static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device
> > *dev)
> > {
> >
> > struct virtnet_info *vi = netdev_priv(dev);
> >
> > - struct send_queue *sq = &vi->sq;
> > + int qnum = skb_get_queue_mapping(skb);
> > + struct send_queue *sq = &vi->sq[qnum];
> >
> > int capacity;
> >
> > /* Free up any pending old buffers before queueing new ones. */
> >
> > @@ -664,13 +701,14 @@ static netdev_tx_t start_xmit(struct sk_buff *skb,
> > struct net_device *dev)>
> > if (likely(capacity == -ENOMEM)) {
> >
> > if (net_ratelimit())
> >
> > dev_warn(&dev->dev,
> >
> > - "TX queue failure: out of memory\n");
> > + "TXQ (%d) failure: out of memory\n",
> > + qnum);
> >
> > } else {
> >
> > dev->stats.tx_fifo_errors++;
> > if (net_ratelimit())
> >
> > dev_warn(&dev->dev,
> >
> > - "Unexpected TX queue failure: %d\n",
> > - capacity);
> > + "Unexpected TXQ (%d) failure: %d\n",
> > + qnum, capacity);
> >
> > }
> > dev->stats.tx_dropped++;
> > kfree_skb(skb);
> >
> > @@ -685,12 +723,12 @@ static netdev_tx_t start_xmit(struct sk_buff *skb,
> > struct net_device *dev)>
> > /* Apparently nice girls don't return TX_BUSY; stop the queue
> >
> > * before it gets out of hand. Naturally, this wastes entries. */
> >
> > if (capacity < 2+MAX_SKB_FRAGS) {
> >
> > - netif_stop_queue(dev);
> > + netif_stop_subqueue(dev, qnum);
> >
> > if (unlikely(!virtqueue_enable_cb_delayed(sq->vq))) {
> >
> > /* More just got used, free them then recheck. */
> > capacity += free_old_xmit_skbs(sq);
> > if (capacity >= 2+MAX_SKB_FRAGS) {
> >
> > - netif_start_queue(dev);
> > + netif_start_subqueue(dev, qnum);
> >
> > virtqueue_disable_cb(sq->vq);
> >
> > }
> >
> > }
> >
> > @@ -758,23 +796,13 @@ static struct rtnl_link_stats64
> > *virtnet_stats(struct net_device *dev,>
> > static void virtnet_netpoll(struct net_device *dev)
> > {
> >
> > struct virtnet_info *vi = netdev_priv(dev);
> >
> > + int i;
> >
> > - napi_schedule(&vi->rq.napi);
> > + for (i = 0; i < vi->curr_queue_pairs; i++)
> > + napi_schedule(&vi->rq[i].napi);
> >
> > }
> > #endif
> >
> > -static int virtnet_open(struct net_device *dev)
> > -{
> > - struct virtnet_info *vi = netdev_priv(dev);
> > -
> > - /* Make sure we have some buffers: if oom use wq. */
> > - if (!try_fill_recv(&vi->rq, GFP_KERNEL))
> > - schedule_delayed_work(&vi->rq.refill, 0);
> > -
> > - virtnet_napi_enable(&vi->rq);
> > - return 0;
> > -}
> > -
> >
> > /*
> >
> > * Send command via the control virtqueue and check status. Commands
> > * supported by the hypervisor, as indicated by feature bits, should
> >
> > @@ -830,13 +858,53 @@ static void virtnet_ack_link_announce(struct
> > virtnet_info *vi)>
> > rtnl_unlock();
> >
> > }
> >
> > +static int virtnet_set_queues(struct virtnet_info *vi)
> > +{
> > + struct scatterlist sg;
> > + struct virtio_net_ctrl_rfs s;
> > + struct net_device *dev = vi->dev;
> > +
> > + s.virtqueue_pairs = vi->curr_queue_pairs;
> > + sg_init_one(&sg, &s, sizeof(s));
> > +
> > + if (!vi->has_cvq)
> > + return -EINVAL;
> > +
> > + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RFS,
> > + VIRTIO_NET_CTRL_RFS_VQ_PAIRS_SET, &sg, 1, 0)){
> > + dev_warn(&dev->dev, "Fail to set the number of queue pairs to"
> > + " %d\n", vi->curr_queue_pairs);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int virtnet_open(struct net_device *dev)
> > +{
> > + struct virtnet_info *vi = netdev_priv(dev);
> > + int i;
> > +
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + /* Make sure we have some buffers: if oom use wq. */
> > + if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
> > + schedule_delayed_work(&vi->rq[i].refill, 0);
> > + virtnet_napi_enable(&vi->rq[i]);
> > + }
> > +
> > + return 0;
> > +}
> > +
> >
> > static int virtnet_close(struct net_device *dev)
> > {
> >
> > struct virtnet_info *vi = netdev_priv(dev);
> >
> > + int i;
> >
> > /* Make sure refill_work doesn't re-enable napi! */
> >
> > - cancel_delayed_work_sync(&vi->rq.refill);
> > - napi_disable(&vi->rq.napi);
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + cancel_delayed_work_sync(&vi->rq[i].refill);
> > + napi_disable(&vi->rq[i].napi);
> > + }
> >
> > return 0;
> >
> > }
> >
> > @@ -948,8 +1016,8 @@ static void virtnet_get_ringparam(struct net_device
> > *dev,>
> > {
> >
> > struct virtnet_info *vi = netdev_priv(dev);
> >
> > - ring->rx_max_pending = virtqueue_get_vring_size(vi->rq.vq);
> > - ring->tx_max_pending = virtqueue_get_vring_size(vi->sq.vq);
> > + ring->rx_max_pending = virtqueue_get_vring_size(vi->rq[0].vq);
> > + ring->tx_max_pending = virtqueue_get_vring_size(vi->sq[0].vq);
> >
> > ring->rx_pending = ring->rx_max_pending;
> > ring->tx_pending = ring->tx_max_pending;
> >
> > }
> >
> > @@ -967,12 +1035,6 @@ static void virtnet_get_drvinfo(struct net_device
> > *dev,>
> > }
> >
> > -static const struct ethtool_ops virtnet_ethtool_ops = {
> > - .get_drvinfo = virtnet_get_drvinfo,
> > - .get_link = ethtool_op_get_link,
> > - .get_ringparam = virtnet_get_ringparam,
> > -};
> > -
> >
> > #define MIN_MTU 68
> > #define MAX_MTU 65535
> >
> > @@ -984,6 +1046,20 @@ static int virtnet_change_mtu(struct net_device
> > *dev, int new_mtu)>
> > return 0;
> >
> > }
> >
> > +/* To avoid contending a lock hold by a vcpu who would exit to host,
> > select the + * txq based on the processor id.
> > + */
> > +static u16 virtnet_select_queue(struct net_device *dev, struct sk_buff
> > *skb) +{
> > + int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
> > + smp_processor_id();
> > +
> > + while (unlikely(txq >= dev->real_num_tx_queues))
> > + txq -= dev->real_num_tx_queues;
> > +
> > + return txq;
> > +}
> > +
> >
> > static const struct net_device_ops virtnet_netdev = {
> >
> > .ndo_open = virtnet_open,
> > .ndo_stop = virtnet_close,
> >
> > @@ -995,6 +1071,7 @@ static const struct net_device_ops virtnet_netdev = {
> >
> > .ndo_get_stats64 = virtnet_stats,
> > .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
> > .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> >
> > + .ndo_select_queue = virtnet_select_queue,
> >
> > #ifdef CONFIG_NET_POLL_CONTROLLER
> >
> > .ndo_poll_controller = virtnet_netpoll,
> >
> > #endif
> >
> > @@ -1030,10 +1107,10 @@ static void virtnet_config_changed_work(struct
> > work_struct *work)>
> > if (vi->status & VIRTIO_NET_S_LINK_UP) {
> >
> > netif_carrier_on(vi->dev);
> >
> > - netif_wake_queue(vi->dev);
> > + netif_tx_wake_all_queues(vi->dev);
> >
> > } else {
> >
> > netif_carrier_off(vi->dev);
> >
> > - netif_stop_queue(vi->dev);
> > + netif_tx_stop_all_queues(vi->dev);
> >
> > }
> >
> > done:
> > mutex_unlock(&vi->config_lock);
> >
> > @@ -1046,41 +1123,212 @@ static void virtnet_config_changed(struct
> > virtio_device *vdev)>
> > schedule_work(&vi->config_work);
> >
> > }
> >
> > -static int init_vqs(struct virtnet_info *vi)
> > +static void free_receive_bufs(struct virtnet_info *vi)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + while (vi->rq[i].pages)
> > + __free_pages(get_a_page(&vi->rq[i], GFP_KERNEL), 0);
> > + }
> > +}
> > +
> > +/* Free memory allocated for send and receive queues */
> > +static void virtnet_free_queues(struct virtnet_info *vi)
> >
> > {
> >
> > - struct virtqueue *vqs[3];
> > - vq_callback_t *callbacks[] = { skb_recv_done, skb_xmit_done, NULL};
> > - const char *names[] = { "input", "output", "control" };
> > - int nvqs, err;
> > + kfree(vi->rq);
> > + vi->rq = NULL;
> > + kfree(vi->sq);
> > + vi->sq = NULL;
> > +}
> >
> > - /* We expect two virtqueues, receive then send,
> > - * and optionally control. */
> > - nvqs = virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ? 3 : 2;
> > +static void free_unused_bufs(struct virtnet_info *vi)
> > +{
> > + void *buf;
> > + int i;
> >
> > - err = vi->vdev->config->find_vqs(vi->vdev, nvqs, vqs, callbacks, names);
> > - if (err)
> > - return err;
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + struct virtqueue *vq = vi->sq[i].vq;
> > + while ((buf = virtqueue_detach_unused_buf(vq)) != NULL)
> > + dev_kfree_skb(buf);
> > + }
> >
> > - vi->rq.vq = vqs[0];
> > - vi->sq.vq = vqs[1];
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + struct virtqueue *vq = vi->rq[i].vq;
> >
> > - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
> > - vi->cvq = vqs[2];
> > + while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) {
> > + if (vi->mergeable_rx_bufs || vi->big_packets)
> > + give_pages(&vi->rq[i], buf);
> > + else
> > + dev_kfree_skb(buf);
> > + --vi->rq[i].num;
> > + }
> > + BUG_ON(vi->rq[i].num != 0);
> > + }
> > +}
> >
> > +static void virtnet_set_affinity(struct virtnet_info *vi, bool set)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + int cpu = set ? i : -1;
> > + virtqueue_set_affinity(vi->rq[i].vq, cpu);
> > + virtqueue_set_affinity(vi->sq[i].vq, cpu);
> > + }
> > +}
> > +
> > +static void virtnet_del_vqs(struct virtnet_info *vi)
> > +{
> > + struct virtio_device *vdev = vi->vdev;
> > +
> > + virtnet_set_affinity(vi, false);
> > +
> > + vdev->config->del_vqs(vdev);
> > +
> > + virtnet_free_queues(vi);
> > +}
> > +
> > +static int virtnet_find_vqs(struct virtnet_info *vi)
> > +{
> > + vq_callback_t **callbacks;
> > + struct virtqueue **vqs;
> > + int ret = -ENOMEM;
> > + int i, total_vqs;
> > + char **names;
> > +
> > + /*
> > + * We expect 1 RX virtqueue followed by 1 TX virtqueue, followd by
> > + * possible control virtqueue, followed by RX/TX N-1 queue pairs used
> > + * in multiqueue mode.
> > + */
> > + total_vqs = vi->max_queue_pairs * 2 +
> > + virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ);
> > +
> > + /* Allocate space for find_vqs parameters */
> > + vqs = kzalloc(total_vqs * sizeof(*vqs), GFP_KERNEL);
> > + callbacks = kzalloc(total_vqs * sizeof(*callbacks), GFP_KERNEL);
> > + if (!vqs || !callbacks)
> > + goto err_mem;
> > + names = kzalloc(total_vqs * sizeof(*names), GFP_KERNEL);
> > + if (!names)
> > + goto err_mem;
> > +
> > + /* Parameters for control virtqueue, if any */
> > + if (vi->has_cvq) {
> > + callbacks[2] = NULL;
> > + names[2] = kasprintf(GFP_KERNEL, "control");
> > + }
> > +
> > + /* Allocate/initialize parameters for send/receive virtqueues */
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + callbacks[rxq2vq(i)] = skb_recv_done;
> > + callbacks[txq2vq(i)] = skb_xmit_done;
> > + names[rxq2vq(i)] = kasprintf(GFP_KERNEL, "input.%d", i);
> > + names[txq2vq(i)] = kasprintf(GFP_KERNEL, "output.%d", i);
> > + }
> > +
> > + ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks,
> > + (const char **)names);
> > + if (ret)
> > + goto err_names;
> > +
> > + if (vi->has_cvq) {
> > + vi->cvq = vqs[2];
> >
> > if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
> >
> > vi->dev->features |= NETIF_F_HW_VLAN_FILTER;
> >
> > }
> >
> > +
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + vi->rq[i].vq = vqs[rxq2vq(i)];
> > + vi->sq[i].vq = vqs[txq2vq(i)];
> > + }
> > +
> > + kfree(callbacks);
> > + kfree(vqs);
> > +
> > + return 0;
> > +
> > +err_names:
> > + for (i = 0; i < total_vqs * 2; i ++)
> > + kfree(names[i]);
> > + kfree(names);
> > +
> > +err_mem:
> > + kfree(callbacks);
> > + kfree(vqs);
> > +
> > + return ret;
> > +}
> > +
> > +static int virtnet_alloc_queues(struct virtnet_info *vi)
> > +{
> > + int i;
> > +
> > + vi->sq = kzalloc(sizeof(vi->sq[0]) * vi->max_queue_pairs, GFP_KERNEL);
> > + vi->rq = kzalloc(sizeof(vi->rq[0]) * vi->max_queue_pairs, GFP_KERNEL);
> > + if (!vi->rq || !vi->sq)
> > + goto err;
> > +
> > + /* setup initial receive and send queue parameters */
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + vi->rq[i].pages = NULL;
> > + INIT_DELAYED_WORK(&vi->rq[i].refill, refill_work);
> > + netif_napi_add(vi->dev, &vi->rq[i].napi, virtnet_poll,
> > + napi_weight);
> > +
> > + sg_init_table(vi->rq[i].sg, ARRAY_SIZE(vi->rq[i].sg));
> > + sg_init_table(vi->sq[i].sg, ARRAY_SIZE(vi->sq[i].sg));
> > + }
> > +
> > +
> >
> > return 0;
> >
> > +
> > +err:
> > + virtnet_free_queues(vi);
> > + return -ENOMEM;
> > +}
> > +
> > +static int init_vqs(struct virtnet_info *vi)
> > +{
> > + int ret;
> > +
> > + /* Allocate send & receive queues */
> > + ret = virtnet_alloc_queues(vi);
> > + if (ret)
> > + goto err;
> > +
> > + ret = virtnet_find_vqs(vi);
> > + if (ret)
> > + goto err_free;
> > +
> > + virtnet_set_affinity(vi, true);
> > + return 0;
> > +
> > +err_free:
> > + virtnet_free_queues(vi);
> > +err:
> > + return ret;
> >
> > }
> >
> > static int virtnet_probe(struct virtio_device *vdev)
> > {
> >
> > - int err;
> > + int i, err;
> >
> > struct net_device *dev;
> > struct virtnet_info *vi;
> >
> > + u16 curr_queue_pairs;
>
> Probably a good idea to rename this max_queue_pairs.
Sure.
>
> > +
> > + /* Find if host supports multiqueue virtio_net device */
> > + err = virtio_config_val(vdev, VIRTIO_NET_F_RFS,
> > + offsetof(struct virtio_net_config,
> > + max_virtqueue_pairs), &curr_queue_pairs);
> > +
> > + /* We need at least 2 queue's */
> > + if (err)
> > + curr_queue_pairs = 1;
>
> Let's also validate against VIRTIO_NET_CTRL_RFS_VQ_PAIRS_MIN
> and VIRTIO_NET_CTRL_RFS_VQ_PAIRS_MAX.
Ok.
>
> > /* Allocate ourselves a network device with room for our info */
> >
> > - dev = alloc_etherdev(sizeof(struct virtnet_info));
> > + dev = alloc_etherdev_mq(sizeof(struct virtnet_info), curr_queue_pairs);
> >
> > if (!dev)
> >
> > return -ENOMEM;
> >
> > @@ -1126,22 +1374,17 @@ static int virtnet_probe(struct virtio_device
> > *vdev)>
> > /* Set up our device-specific information */
> > vi = netdev_priv(dev);
> >
> > - netif_napi_add(dev, &vi->rq.napi, virtnet_poll, napi_weight);
> >
> > vi->dev = dev;
> > vi->vdev = vdev;
> > vdev->priv = vi;
> >
> > - vi->rq.pages = NULL;
> >
> > vi->stats = alloc_percpu(struct virtnet_stats);
> > err = -ENOMEM;
> > if (vi->stats == NULL)
> >
> > goto free;
> >
> > - INIT_DELAYED_WORK(&vi->rq.refill, refill_work);
> >
> > mutex_init(&vi->config_lock);
> > vi->config_enable = true;
> > INIT_WORK(&vi->config_work, virtnet_config_changed_work);
> >
> > - sg_init_table(vi->rq.sg, ARRAY_SIZE(vi->rq.sg));
> > - sg_init_table(vi->sq.sg, ARRAY_SIZE(vi->sq.sg));
> >
> > /* If we can receive ANY GSO packets, we must allocate large ones. */
> > if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
> >
> > @@ -1152,10 +1395,21 @@ static int virtnet_probe(struct virtio_device
> > *vdev)>
> > if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
> >
> > vi->mergeable_rx_bufs = true;
> >
> > + if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
> > + vi->has_cvq = true;
> > +
> > + /* Use single tx/rx queue pair as default */
> > + vi->curr_queue_pairs = 1;
> > + vi->max_queue_pairs = curr_queue_pairs;
> > +
> > + /* Allocate/initialize the rx/tx queues, and invoke find_vqs */
> >
> > err = init_vqs(vi);
> > if (err)
> >
> > goto free_stats;
> >
> > + netif_set_real_num_tx_queues(dev, 1);
> > + netif_set_real_num_rx_queues(dev, 1);
> > +
> >
> > err = register_netdev(dev);
> > if (err) {
> >
> > pr_debug("virtio_net: registering device failed\n");
> >
> > @@ -1163,12 +1417,15 @@ static int virtnet_probe(struct virtio_device
> > *vdev)>
> > }
> >
> > /* Last of all, set up some receive buffers. */
> >
> > - try_fill_recv(&vi->rq, GFP_KERNEL);
> > -
> > - /* If we didn't even get one input buffer, we're useless. */
> > - if (vi->rq.num == 0) {
> > - err = -ENOMEM;
> > - goto unregister;
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + try_fill_recv(&vi->rq[i], GFP_KERNEL);
> > +
> > + /* If we didn't even get one input buffer, we're useless. */
> > + if (vi->rq[i].num == 0) {
> > + free_unused_bufs(vi);
> > + err = -ENOMEM;
> > + goto free_recv_bufs;
> > + }
> >
> > }
> >
> > /* Assume link up if device can't report link status,
> >
> > @@ -1181,13 +1438,20 @@ static int virtnet_probe(struct virtio_device
> > *vdev)>
> > netif_carrier_on(dev);
> >
> > }
> >
> > - pr_debug("virtnet: registered device %s\n", dev->name);
> > + pr_debug("virtnet: registered device %s with %d RX and TX vq's\n",
> > + dev->name, curr_queue_pairs);
> > +
> >
> > return 0;
> >
> > -unregister:
> > +free_recv_bufs:
> > + free_receive_bufs(vi);
> >
> > unregister_netdev(dev);
> >
> > +
> >
> > free_vqs:
> > - vdev->config->del_vqs(vdev);
> > + for (i = 0; i <curr_queue_pairs; i++)
> > + cancel_delayed_work_sync(&vi->rq[i].refill);
> > + virtnet_del_vqs(vi);
> > +
> >
> > free_stats:
> > free_percpu(vi->stats);
> >
> > free:
> > @@ -1195,28 +1459,6 @@ free:
> > return err;
> >
> > }
> >
> > -static void free_unused_bufs(struct virtnet_info *vi)
> > -{
> > - void *buf;
> > - while (1) {
> > - buf = virtqueue_detach_unused_buf(vi->sq.vq);
> > - if (!buf)
> > - break;
> > - dev_kfree_skb(buf);
> > - }
> > - while (1) {
> > - buf = virtqueue_detach_unused_buf(vi->rq.vq);
> > - if (!buf)
> > - break;
> > - if (vi->mergeable_rx_bufs || vi->big_packets)
> > - give_pages(&vi->rq, buf);
> > - else
> > - dev_kfree_skb(buf);
> > - --vi->rq.num;
> > - }
> > - BUG_ON(vi->rq.num != 0);
> > -}
> > -
> >
> > static void remove_vq_common(struct virtnet_info *vi)
> > {
> >
> > vi->vdev->config->reset(vi->vdev);
> >
> > @@ -1224,10 +1466,9 @@ static void remove_vq_common(struct virtnet_info
> > *vi)>
> > /* Free unused buffers in both send and recv, if any. */
> > free_unused_bufs(vi);
> >
> > - vi->vdev->config->del_vqs(vi->vdev);
> > + free_receive_bufs(vi);
> >
> > - while (vi->rq.pages)
> > - __free_pages(get_a_page(&vi->rq, GFP_KERNEL), 0);
> > + virtnet_del_vqs(vi);
> >
> > }
> >
> > static void __devexit virtnet_remove(struct virtio_device *vdev)
> >
> > @@ -1253,6 +1494,7 @@ static void __devexit virtnet_remove(struct
> > virtio_device *vdev)>
> > static int virtnet_freeze(struct virtio_device *vdev)
> > {
> >
> > struct virtnet_info *vi = vdev->priv;
> >
> > + int i;
> >
> > /* Prevent config work handler from accessing the device */
> > mutex_lock(&vi->config_lock);
> >
> > @@ -1260,10 +1502,14 @@ static int virtnet_freeze(struct virtio_device
> > *vdev)>
> > mutex_unlock(&vi->config_lock);
> >
> > netif_device_detach(vi->dev);
> >
> > - cancel_delayed_work_sync(&vi->rq.refill);
> > + for (i = 0; i < vi->max_queue_pairs; i++)
> > + cancel_delayed_work_sync(&vi->rq[i].refill);
> >
> > if (netif_running(vi->dev))
> >
> > - napi_disable(&vi->rq.napi);
> > + for (i = 0; i < vi->max_queue_pairs; i++) {
> > + napi_disable(&vi->rq[i].napi);
> > + netif_napi_del(&vi->rq[i].napi);
> > + }
> >
> > remove_vq_common(vi);
> >
> > @@ -1275,24 +1521,28 @@ static int virtnet_freeze(struct virtio_device
> > *vdev)>
> > static int virtnet_restore(struct virtio_device *vdev)
> > {
> >
> > struct virtnet_info *vi = vdev->priv;
> >
> > - int err;
> > + int err, i;
> >
> > err = init_vqs(vi);
> > if (err)
> >
> > return err;
> >
> > if (netif_running(vi->dev))
> >
> > - virtnet_napi_enable(&vi->rq);
> > + for (i = 0; i < vi->max_queue_pairs; i++)
> > + virtnet_napi_enable(&vi->rq[i]);
> >
> > netif_device_attach(vi->dev);
> >
> > - if (!try_fill_recv(&vi->rq, GFP_KERNEL))
> > - schedule_delayed_work(&vi->rq.refill, 0);
> > + for (i = 0; i < vi->max_queue_pairs; i++)
> > + if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
> > + schedule_delayed_work(&vi->rq[i].refill, 0);
> >
> > mutex_lock(&vi->config_lock);
> > vi->config_enable = true;
> > mutex_unlock(&vi->config_lock);
> >
> > + BUG_ON(virtnet_set_queues(vi));
> > +
>
> Won't this always fail when control vq is off?
Yes, will add a check of VIRTIO_NET_F_RFS before calling virtnet_set_queues().
>
> > return 0;
> >
> > }
> > #endif
> >
> > @@ -1310,7 +1560,7 @@ static unsigned int features[] = {
> >
> > VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
> > VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
> > VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
> >
> > - VIRTIO_NET_F_GUEST_ANNOUNCE,
> > + VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_RFS,
> >
> > };
> >
> > static struct virtio_driver virtio_net_driver = {
> >
> > @@ -1328,6 +1578,12 @@ static struct virtio_driver virtio_net_driver = {
> >
> > #endif
> > };
> >
> > +static const struct ethtool_ops virtnet_ethtool_ops = {
> > + .get_drvinfo = virtnet_get_drvinfo,
> > + .get_link = ethtool_op_get_link,
> > + .get_ringparam = virtnet_get_ringparam,
> > +};
> > +
> >
> > static int __init init(void)
> > {
> >
> > return register_virtio_driver(&virtio_net_driver);
> >
> > diff --git a/include/uapi/linux/virtio_net.h
> > b/include/uapi/linux/virtio_net.h index 2470f54..6056cec 100644
> > --- a/include/uapi/linux/virtio_net.h
> > +++ b/include/uapi/linux/virtio_net.h
> > @@ -51,6 +51,7 @@
> >
> > #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control
> > support
*/
> > #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on
> > the
> >
> > * network */
> >
> > +#define VIRTIO_NET_F_RFS 22 /* Device supports multiple TXQ/RXQ */
> >
> > #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
> > #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
> >
> > @@ -60,6 +61,8 @@ struct virtio_net_config {
> >
> > __u8 mac[6];
> > /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
> > __u16 status;
> >
> > + /* Total number of RX/TX queues */
> > + __u16 max_virtqueue_pairs;
> >
> > } __attribute__((packed));
> >
> > /* This is the first element of the scatter-gather list. If you don't
> >
> > @@ -166,4 +169,17 @@ struct virtio_net_ctrl_mac {
> >
> > #define VIRTIO_NET_CTRL_ANNOUNCE 3
> >
> > #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
> >
> > +/*
> > + * Control multiqueue
> > + *
> > + */
> > +struct virtio_net_ctrl_rfs {
> > + u16 virtqueue_pairs;
> > +};
> > +
> > +#define VIRTIO_NET_CTRL_RFS 4
> > + #define VIRTIO_NET_CTRL_RFS_VQ_PAIRS_SET 0
> > + #define VIRTIO_NET_CTRL_RFS_VQ_PAIRS_MIN 1
> > + #define VIRTIO_NET_CTRL_RFS_VQ_PAIRS_MAX 0x8000
> > +
> >
> > #endif /* _LINUX_VIRTIO_NET_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
