From: Magnus Damm <d...@opensource.se>

Introduce sh_cmt_read_cmstr/cmcsr/cmcnt() and
sh_cmt_write_cmstr/cmcsr/cmcnt/cmcor() to in the
future allow us to split counter registers from
control registers and reduce code complexity by
removing sh_cmt_read() and sh_cmt_write(). 

Signed-off-by: Magnus Damm <d...@opensource.se>
---

 drivers/clocksource/sh_cmt.c |   71 ++++++++++++++++++++++++++++++++----------
 1 file changed, 55 insertions(+), 16 deletions(-)

--- 0001/drivers/clocksource/sh_cmt.c
+++ work/drivers/clocksource/sh_cmt.c   2012-12-14 10:50:15.000000000 +0900
@@ -86,6 +86,21 @@ static inline unsigned long sh_cmt_read(
        return ioread16(base + offs);
 }
 
+static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
+{
+       return sh_cmt_read(p, CMSTR);
+}
+
+static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)
+{
+       return sh_cmt_read(p, CMCSR);
+}
+
+static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p)
+{
+       return sh_cmt_read(p, CMCNT);
+}
+
 static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
                                unsigned long value)
 {
@@ -112,21 +127,45 @@ static inline void sh_cmt_write(struct s
        iowrite16(value, base + offs);
 }
 
+static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
+                                     unsigned long value)
+{
+       sh_cmt_write(p, CMSTR, value);
+}
+
+static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,
+                                     unsigned long value)
+{
+       sh_cmt_write(p, CMCSR, value);
+}
+
+static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p,
+                                     unsigned long value)
+{
+       sh_cmt_write(p, CMCNT, value);
+}
+
+static inline void sh_cmt_write_cmcor(struct sh_cmt_priv *p,
+                                     unsigned long value)
+{
+       sh_cmt_write(p, CMCOR, value);
+}
+
 static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
                                        int *has_wrapped)
 {
        unsigned long v1, v2, v3;
        int o1, o2;
 
-       o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+       o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit;
 
        /* Make sure the timer value is stable. Stolen from acpi_pm.c */
        do {
                o2 = o1;
-               v1 = sh_cmt_read(p, CMCNT);
-               v2 = sh_cmt_read(p, CMCNT);
-               v3 = sh_cmt_read(p, CMCNT);
-               o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+               v1 = sh_cmt_read_cmcnt(p);
+               v2 = sh_cmt_read_cmcnt(p);
+               v3 = sh_cmt_read_cmcnt(p);
+               o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit;
        } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
                          || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
 
@@ -142,14 +181,14 @@ static void sh_cmt_start_stop_ch(struct
 
        /* start stop register shared by multiple timer channels */
        raw_spin_lock_irqsave(&sh_cmt_lock, flags);
-       value = sh_cmt_read(p, CMSTR);
+       value = sh_cmt_read_cmstr(p);
 
        if (start)
                value |= 1 << cfg->timer_bit;
        else
                value &= ~(1 << cfg->timer_bit);
 
-       sh_cmt_write(p, CMSTR, value);
+       sh_cmt_write_cmstr(p, value);
        raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
 }
 
@@ -173,14 +212,14 @@ static int sh_cmt_enable(struct sh_cmt_p
        /* configure channel, periodic mode and maximum timeout */
        if (p->width == 16) {
                *rate = clk_get_rate(p->clk) / 512;
-               sh_cmt_write(p, CMCSR, 0x43);
+               sh_cmt_write_cmcsr(p, 0x43);
        } else {
                *rate = clk_get_rate(p->clk) / 8;
-               sh_cmt_write(p, CMCSR, 0x01a4);
+               sh_cmt_write_cmcsr(p, 0x01a4);
        }
 
-       sh_cmt_write(p, CMCOR, 0xffffffff);
-       sh_cmt_write(p, CMCNT, 0);
+       sh_cmt_write_cmcor(p, 0xffffffff);
+       sh_cmt_write_cmcnt(p, 0);
 
        /*
         * According to the sh73a0 user's manual, as CMCNT can be operated
@@ -194,12 +233,12 @@ static int sh_cmt_enable(struct sh_cmt_p
         * take RCLKx2 at maximum.
         */
        for (k = 0; k < 100; k++) {
-               if (!sh_cmt_read(p, CMCNT))
+               if (!sh_cmt_read_cmcnt(p))
                        break;
                udelay(1);
        }
 
-       if (sh_cmt_read(p, CMCNT)) {
+       if (sh_cmt_read_cmcnt(p)) {
                dev_err(&p->pdev->dev, "cannot clear CMCNT\n");
                ret = -ETIMEDOUT;
                goto err1;
@@ -222,7 +261,7 @@ static void sh_cmt_disable(struct sh_cmt
        sh_cmt_start_stop_ch(p, 0);
 
        /* disable interrupts in CMT block */
-       sh_cmt_write(p, CMCSR, 0);
+       sh_cmt_write_cmcsr(p, 0);
 
        /* stop clock */
        clk_disable(p->clk);
@@ -270,7 +309,7 @@ static void sh_cmt_clock_event_program_v
                if (new_match > p->max_match_value)
                        new_match = p->max_match_value;
 
-               sh_cmt_write(p, CMCOR, new_match);
+               sh_cmt_write_cmcor(p, new_match);
 
                now = sh_cmt_get_counter(p, &has_wrapped);
                if (has_wrapped && (new_match > p->match_value)) {
@@ -346,7 +385,7 @@ static irqreturn_t sh_cmt_interrupt(int
        struct sh_cmt_priv *p = dev_id;
 
        /* clear flags */
-       sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits);
+       sh_cmt_write_cmcsr(p, sh_cmt_read_cmcsr(p) & p->clear_bits);
 
        /* update clock source counter to begin with if enabled
         * the wrap flag should be cleared by the timer specific
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to