This change updates the ti-soc-thermal driver to use
standard GPIO DT bindings to read the GPIO number associated
to thermal shutdown IRQ, in case the device features it.
Previously, the code was using a specific DT bindings.
As now OMAP supports the standard way to model GPIOs,
there is no point in having a ti specific binding.
Cc: Zhang Rui <rui.zh...@intel.com>
Cc: Grant Likely <grant.lik...@linaro.org>
Cc: Rob Herring <rob.herr...@calxeda.com>
Cc: linux...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Signed-off-by: Eduardo Valentin <eduardo.valen...@ti.com>
---
Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt | 9 +++++----
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 8 ++------
2 files changed, 7 insertions(+), 10 deletions(-)
---
Rui,
This is the rebased version of patch 01. It has been rebased on
your thermal/next. Please send it for 3.11. All remaining patches
on this series have been applied to respective for_3.11 branches
on corresponding trees.
diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
index 1953b33..0c9222d 100644
--- a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
@@ -17,8 +17,9 @@ Required properties:
- interrupts : this entry should indicate which interrupt line
the talert signal is routed to;
Specific:
-- ti,tshut-gpio : this entry should be used to inform which GPIO
-line the tshut signal is routed to;
+- gpios : this entry should be used to inform which GPIO
+line the tshut signal is routed to. The informed GPIO will
+be treated as an IRQ;
- regs : this entry must also be specified and it is specific
to each bandgap version, because the mapping may change from
soc to soc, apart of depending on available features.
@@ -37,7 +38,7 @@ bandgap {
0x4a002378 0x18>;
compatible = "ti,omap4460-bandgap";
interrupts = <0 126 4>; /* talert */
- ti,tshut-gpio = <86>;
+ gpios = <&gpio3 22 0>; /* tshut */
};
OMAP4470:
@@ -47,7 +48,7 @@ bandgap {
0x4a002378 0x18>;
compatible = "ti,omap4470-bandgap";
interrupts = <0 126 4>; /* talert */
- ti,tshut-gpio = <86>;
+ gpios = <&gpio3 22 0>; /* tshut */
};
OMAP5430:
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 7c0b3eb..9dfd471 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -38,6 +38,7 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
#include <linux/io.h>
#include "ti-bandgap.h"
@@ -1129,7 +1130,6 @@ static struct ti_bandgap *ti_bandgap_build(struct
platform_device *pdev)
const struct of_device_id *of_id;
struct ti_bandgap *bgp;
struct resource *res;
- u32 prop;
int i;
/* just for the sake */
@@ -1173,11 +1173,7 @@ static struct ti_bandgap *ti_bandgap_build(struct
platform_device *pdev)
} while (res);
if (TI_BANDGAP_HAS(bgp, TSHUT)) {
- if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
- dev_err(&pdev->dev, "missing tshut gpio in device
tree\n");
- return ERR_PTR(-EINVAL);
- }
- bgp->tshut_gpio = prop;
+ bgp->tshut_gpio = of_get_gpio(node, 0);
if (!gpio_is_valid(bgp->tshut_gpio)) {
dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
bgp->tshut_gpio);
--
1.8.2.1.342.gfa7285d
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
