Not valid because the jump to that part of the code is protected.
If a polling response for a valid status and no timeout, is detected then
it attempts to the command for real only after success or a test.
Otherwise it would be valid.
Cheers,
On Fri, 25 May 2001, Rasmus Andersen wrote:
> Date: Fri, 25 May 2001 22:18:13 +0200
> From: Rasmus Andersen <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: [PATCH] kmalloc checks for drivers/ide/ide-probe.c (244ac16)
>
> Hi.
>
> The following patch adds a number of checks for kmalloc returns
> to drivers/ide/ide-probe.c. It applies against ac16.
>
> One comment: This patch adds 'drive-present = 0' to the
> code path for the EXABYTE case. I could not discern if this was a
> shortcoming of the original code or not. Please comment.
>
>
> --- linux-244-ac16-clean/drivers/ide/ide-probe.c Fri May 25 21:11:08 2001
> +++ linux-244-ac16/drivers/ide/ide-probe.c Fri May 25 21:51:08 2001
> @@ -58,6 +58,11 @@
> struct hd_driveid *id;
>
> id = drive->id = kmalloc (SECTOR_WORDS*4, GFP_ATOMIC); /* called with
>interrupts disabled! */
> + if (!id) {
> + printk(KERN_WARNING "(ide-probe::do_identify) Out of memory.\n");
> + goto err_kmalloc;
> + }
> +
> ide_input_data(drive, id, SECTOR_WORDS); /* read 512 bytes of
>id info */
> ide__sti(); /* local CPU only */
> ide_fix_driveid(id);
> @@ -76,8 +81,7 @@
> if ((id->model[0] == 'P' && id->model[1] == 'M')
> || (id->model[0] == 'S' && id->model[1] == 'K')) {
> printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model);
> - drive->present = 0;
> - return;
> + goto err_misc;
> }
> #endif /* CONFIG_SCSI_EATA_DMA || CONFIG_SCSI_EATA_PIO */
>
> @@ -96,7 +100,7 @@
> ide_fixstring (id->serial_no, sizeof(id->serial_no), bswap);
>
> if (strstr(id->model, "E X A B Y T E N E S T"))
> - return;
> + goto err_misc;
>
> id->model[sizeof(id->model)-1] = '\0'; /* we depend on this a lot! */
> printk("%s: %s, ", drive->name, id->model);
> @@ -111,8 +115,7 @@
> #ifdef CONFIG_BLK_DEV_PDC4030
> if (HWIF(drive)->channel == 1 && HWIF(drive)->chipset == ide_pdc4030) {
> printk(" -- not supported on 2nd Promise port\n");
> - drive->present = 0;
> - return;
> + goto err_misc;
> }
> #endif /* CONFIG_BLK_DEV_PDC4030 */
> switch (type) {
> @@ -174,6 +177,12 @@
> printk("ATA DISK drive\n");
> QUIRK_LIST(HWIF(drive),drive);
> return;
> +
> +err_misc:
> + kfree(id);
> +err_kmalloc:
> + drive->present = 0;
> + return;
> }
>
> /*
> @@ -759,11 +768,23 @@
> }
> minors = units * (1<<PARTN_BITS);
> gd = kmalloc (sizeof(struct gendisk), GFP_KERNEL);
> - gd->sizes = kmalloc (minors * sizeof(int), GFP_KERNEL);
> - gd->part = kmalloc (minors * sizeof(struct hd_struct), GFP_KERNEL);
> - bs = kmalloc (minors*sizeof(int), GFP_KERNEL);
> - max_sect = kmalloc (minors*sizeof(int), GFP_KERNEL);
> - max_ra = kmalloc (minors*sizeof(int), GFP_KERNEL);
> + if (!gd)
> + goto err_kmalloc_gd;
> + gd->sizes = kmalloc (minors * sizeof(int), GFP_KERNEL);
> + if (!gd->sizes)
> + goto err_kmalloc_gd_sizes;
> + gd->part = kmalloc (minors * sizeof(struct hd_struct), GFP_KERNEL);
> + if (!gd->part)
> + goto err_kmalloc_gd_part;
> + bs = kmalloc (minors*sizeof(int), GFP_KERNEL);
> + if (!bs)
> + goto err_kmalloc_gs;
> + max_sect = kmalloc (minors*sizeof(int), GFP_KERNEL);
> + if (!max_sect)
> + goto err_kmalloc_max_sect;
> + max_ra = kmalloc (minors*sizeof(int), GFP_KERNEL);
> + if (!max_ra)
> + goto err_kmalloc_max_ra;
>
> memset(gd->part, 0, minors * sizeof(struct hd_struct));
>
> @@ -816,6 +837,21 @@
> devfs_mk_dir (ide_devfs_handle, name, NULL);
> }
> }
> + return;
> +
> +err_kmalloc_max_ra:
> + kfree(max_sect);
> +err_kmalloc_max_sect:
> + kfree(bs);
> +err_kmalloc_gs:
> + kfree(gd->part);
> +err_kmalloc_gd_part:
> + kfree(gd->sizes);
> +err_kmalloc_gd_sizes:
> + kfree(gd);
> +err_kmalloc_gd:
> + printk(KERN_WARNING "(ide::init_gendisk) Out of memory\n");
> + return;
> }
>
> static int hwif_init (ide_hwif_t *hwif)
> --
> regards,
> Rasmus([EMAIL PROTECTED])
>
> An Emacs reference mug is what I want. It would hold ten gallons of
> coffee. -- Steve VanDevender
>
Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------
ASL, Inc. Toll free: 1-877-ASL-3535
1757 Houret Court Fax: 1-408-941-2071
Milpitas, CA 95035 Web: www.aslab.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
