Thank you Felipe
[add CC Giancarlo from ST]
On Tuesday 16 July 2013 15:04:25 Felipe Balbi wrote:
> Hi,
>
> On Tue, Jul 16, 2013 at 02:01:33PM +0200, Federico Vaga wrote:
> > Hello,
> >
> > I have an x86 board made by STMicroelectronics (STA2X11) with the Synopsis
> > USB-OTG DesignWare 2 on it and connected through the PCI-e bus.
> >
> > I know that there are two drivers for the same controller:
> > (host) drivers/staging/dwc2/*
> > (device) drivers/usb/gadget/s3c-hsotg.{c|h}
> >
> > So, at the moment I cannot have a board with both host/device working at
> > the same time. I have to choose to use the block as device or host,
> > right?
> >
> > I know that the plan is to merge the s3c-hsotg in the dwc2 driver
> > (https://lwn.net/Articles/540283/). Are still accepted patch to s3c-hsotg?
> > Or it is work in progress right now (soon), so it is better to wait after
> > the merge?
> >
> > In order to use the s3c-hsotg I must implement a PCI wrapper that uses
> > this
> > driver. It will be accepted in the kernel even if it will be removed
> > sooner or later because of the driver merge?
>
> currently s3c-hsotg has too much knowledge of the Samsung platform. My
> suggestion would be to help dwc2 get in better shape. It should be
> rather easy to support your board since that already has a PCI wrapper
> driver.
>
> So, stick to host only for now, help clean up dwc2 and move it out of
> staging, then later it should be fairly simple to merge the device side
> in it.
Is there something like a TODO list of dwc2 known problems?
--
Federico Vaga
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
