With ARC uart driver switching to generic earlycon, we no longer need
this ugliness. You won't be missed.
Signed-off-by: Vineet Gupta <vgu...@synopsys.com>
---
arch/arc/plat-arcfpga/Kconfig | 7 ---
arch/arc/plat-arcfpga/platform.c | 97 +---------------------------------------
2 files changed, 2 insertions(+), 102 deletions(-)
diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
index e27bb5cc3c1e..b9f34cf55acf 100644
--- a/arch/arc/plat-arcfpga/Kconfig
+++ b/arch/arc/plat-arcfpga/Kconfig
@@ -41,11 +41,4 @@ config ISS_SMP_EXTN
-XTL (To enable CPU start/stop/set-PC for another CPU)
It doesn't provide coherent Caches and/or Atomic Ops (LLOCK/SCOND)
-config ARC_SERIAL_BAUD
- int "UART Baud rate"
- default "115200"
- depends on SERIAL_ARC || SERIAL_ARC_CONSOLE
- help
- Baud rate for the ARC UART
-
endif
diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c
index 61c7e5997387..b8d0d456627f 100644
--- a/arch/arc/plat-arcfpga/platform.c
+++ b/arch/arc/plat-arcfpga/platform.c
@@ -22,115 +22,22 @@
#include <plat/smp.h>
#include <plat/irq.h>
-/*----------------------- Platform Devices -----------------------------*/
-
-#if IS_ENABLED(CONFIG_SERIAL_ARC)
-static unsigned long arc_uart_info[] = {
- 0, /* uart->is_emulated (runtime @running_on_hw) */
- 0, /* uart->port.uartclk */
- 0, /* uart->baud */
- 0
-};
-
-#if defined(CONFIG_SERIAL_ARC_CONSOLE)
-/*
- * static platform data - but only for early serial
- * TBD: derive this from a special DT node
- */
-static struct resource arc_uart0_res[] = {
- {
- .start = UART0_BASE,
- .end = UART0_BASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = UART0_IRQ,
- .end = UART0_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device arc_uart0_dev = {
- .name = "arc-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(arc_uart0_res),
- .resource = arc_uart0_res,
- .dev = {
- .platform_data = &arc_uart_info,
- },
-};
-
-static struct platform_device *fpga_early_devs[] __initdata = {
- &arc_uart0_dev,
-};
-#endif /* CONFIG_SERIAL_ARC_CONSOLE */
-
-static void arc_fpga_serial_init(void)
-{
- /* To let driver workaround ISS bug: baudh Reg can't be set to 0 */
- arc_uart_info[0] = !running_on_hw;
-
- arc_uart_info[1] = arc_get_core_freq();
-
- arc_uart_info[2] = CONFIG_ARC_SERIAL_BAUD;
-
-#if defined(CONFIG_SERIAL_ARC_CONSOLE)
- early_platform_add_devices(fpga_early_devs,
- ARRAY_SIZE(fpga_early_devs));
-
- /*
- * ARC console driver registers (build time) as an early platform driver
- * of class "earlyprintk". However it needs explicit cmdline toggle
- * "earlyprintk=ttyARC0" to be successfuly runtime registered.
- * Otherwise the early probe below fails to find the driver
- */
- early_platform_driver_probe("earlyprintk", 1, 0);
-
- /*
- * This is to make sure that arc uart would be preferred console
- * despite one/more of following:
- * -command line lacked "console=ttyARC0" or
- * -CONFIG_VT_CONSOLE was enabled (for no reason whatsoever)
- * Note that this needs to be done after above early console is reg,
- * otherwise the early console never gets a chance to run.
- */
- add_preferred_console("ttyARC", 0, "115200");
-#endif /* CONFIG_SERIAL_ARC_CONSOLE */
-}
-#else /* !IS_ENABLED(CONFIG_SERIAL_ARC) */
-static void arc_fpga_serial_init(void)
-{
-}
-#endif
-
static void __init plat_fpga_early_init(void)
{
pr_info("[plat-arcfpga]: registering early dev resources\n");
- arc_fpga_serial_init();
-
#ifdef CONFIG_ISS_SMP_EXTN
iss_model_init_early_smp();
#endif
}
-static struct of_dev_auxdata plat_auxdata_lookup[] __initdata = {
-#if IS_ENABLED(CONFIG_SERIAL_ARC)
- OF_DEV_AUXDATA("snps,arc-uart", UART0_BASE, "arc-uart", arc_uart_info),
-#endif
- {}
-};
-
static void __init plat_fpga_populate_dev(void)
{
- pr_info("[plat-arcfpga]: registering device resources\n");
-
/*
* Traverses flattened DeviceTree - registering platform devices
- * complete with their resources
+ * (if any) complete with their resources
*/
- of_platform_populate(NULL, of_default_bus_match_table,
- plat_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
/*----------------------- Machine Descriptions ------------------------------
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
