Hi all.
(Sorry, I screwd up with CC list in previous mails, so I'm doing this resend).
This patch set introduces address sanitizer for linux kernel (kasan).
Address sanitizer is dynamic memory error detector. It detects:
- Use after free bugs.
- Out of bounds reads/writes in kmalloc
It is possible, but not implemented yet or not included into this patch series:
- Global buffer overflow
- Stack buffer overflow
- Use after return
In this patches contains kasan for x86/x86_64/arm architectures, for buddy and
SLUB allocator.
Patches are base on next-20140704 and also available in git:
git://github.com/aryabinin/linux.git --branch=kasan/kasan_v1
The main idea was borrowed from
https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel.
The original implementation (only x88_64 and only for SLAB) by Andrey Konovalov
could be
found here http://github.com/xairy/linux. Some of code in this patches was
stolen from there.
To use this feature you need pretty fresh GCC (revision r211699 from 2014-06-16
or
above).
To enable kasan configure kernel with:
CONFIG_KASAN = y
and
CONFIG_KASAN_SANTIZE_ALL = y
Currently KASAN works only with SLUB allocator. It is highly recommended to run
KASAN with
CONFIG_SLUB_DEBUG=y and use 'slub_debug=U' in boot cmdline to enable user
tracking
(free and alloc stacktraces).
Basic concept of kasan:
The main idea of KASAN is to use shadow memory to record whether each byte of
memory
is safe to access or not, and use compiler's instrumentation to check the
shadow memory
on each memory access.
Address sanitizer dedicates 1/8 of the low memory to the shadow memory and uses
direct
mapping with a scale and offset to translate a memory address to its
corresponding
shadow address.
Here is function to translate address to corresponding shadow address:
unsigned long kasan_mem_to_shadow(unsigned long addr)
{
return ((addr) >> KASAN_SHADOW_SCALE_SHIFT)
+ kasan_shadow_start - (PAGE_OFFSET >>
KASAN_SHADOW_SCALE_SHIFT);
}
where KASAN_SHADOW_SCALE_SHIFT = 3.
So for every 8 bytes of lowmemory there is one corresponding byte of shadow
memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes of
the
corresponding memory region are valid for access; k (1 <= k <= 7) means that
the first k bytes are valid for access, and other (8 - k) bytes are not;
Any negative value indicates that the entire 8-bytes are unaccessible.
Different negative values used to distinguish between different kinds of
unaccessible memory (redzones, freed memory) (see mm/kasan/kasan.h).
To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr))
before each memory access of size 1, 2, 4, 8 or 16.
These functions check whether memory region is valid to access or not by
checking
corresponding shadow memory. If access is not valid an error printed.
TODO:
- Optimizations: __asan_load*/__asan_store* are called for every memory
access, so it's
important to make them as fast as possible.
In this patch set introduced only reference design of memory checking
algorithm. It's
slow but very simple, so anyone could easily understand basic concept.
In future versions I'll try bring optimized versions with some numbers.
- It seems like guard page introduced in c0a32f (mm: more intensive memory
corruption debugging)
could be easily reused for kasan as well.
- get rid of kasan_disable_local()/kasan_enable_local() functions.
kasan_enable/kasan_disable are
used in some rare cases when we need validly access poisoned areas. This
functions might be a
stopping gap for inline instrumentation (see below).
TODO probably not for these series:
- Quarantine for slub. For more strong use after free detection we need to
delay reusing of freed
slabs. So we need a something similar to guard pages in buddy allocator.
Such quarantine might
be useful even without kasan.
- Inline instrumentation. Inline instrumentation means that fast patch of
__asan_load* __asan_store* calls
will be implemented in compiler, and instead of inserting function calls
compiler will actually insert
this fast path. To be able to do this we need (at least):
a) get rid of kasan_disable()/kasan_enable() (see above)
b) get rid of kasan_initialized flag. The main reason why we have this
flag now is because we don't
have any shadow on early stages of boot.
Konstantin Khlebnikov suggested a way to solve this issue:
We could reserve virtual address space for shadow and map pages
on very early stage of
boot process (for x86_64 I think it should be done somewhere in
x86_64_start_kernel).
So we will have shadow all the time an flag kasan_initialized
will no longer required.
- Stack instrumentation (currently doesn't supported in mainline GCC though it
is possible)
- Global variables instrumentation
- Use after return
[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
List of already fixed bugs found by address sanitizer:
aab515d (fib_trie: remove potential out of bound access)
984f173 ([SCSI] sd: Fix potential out-of-bounds access)
5e9ae2e (aio: fix use-after-free in aio_migratepage)
2811eba (ipv6: udp packets following an UFO enqueued packet need also be
handled by UFO)
057db84 (tracing: Fix potential out-of-bounds in trace_get_user())
9709674 (ipv4: fix a race in ip4_datagram_release_cb())
4e8d213 (ext4: fix use-after-free in ext4_mb_new_blocks)
624483f (mm: rmap: fix use-after-free in __put_anon_vma)
Cc: Dmitry Vyukov <dvyu...@google.com>
Cc: Konstantin Serebryany <k...@google.com>
Cc: Alexey Preobrazhensky <pre...@google.com>
Cc: Andrey Konovalov <adech...@gmail.com>
Cc: Yuri Gribov <tetra2...@gmail.com>
Cc: Konstantin Khlebnikov <koc...@gmail.com>
Cc: Sasha Levin <sasha.le...@oracle.com>
Cc: Michal Marek <mma...@suse.cz>
Cc: Russell King <li...@arm.linux.org.uk>
Cc: Thomas Gleixner <t...@linutronix.de>
Cc: Ingo Molnar <mi...@redhat.com>
Cc: Christoph Lameter <c...@linux.com>
Cc: Pekka Enberg <penb...@kernel.org>
Cc: David Rientjes <rient...@google.com>
Cc: Joonsoo Kim <iamjoonsoo....@lge.com>
Cc: Andrew Morton <a...@linux-foundation.org>
Cc: <linux-kbu...@vger.kernel.org>
Cc: <linux-arm-ker...@lists.infradead.org>
Cc: <x...@kernel.org>
Cc: <linux...@kvack.org>
Andrey Ryabinin (21):
Add kernel address sanitizer infrastructure.
init: main: initialize kasan's shadow area on boot
x86: add kasan hooks fort memcpy/memmove/memset functions
x86: boot: vdso: disable instrumentation for code not linked with
kernel
x86: cpu: don't sanitize early stages of a secondary CPU boot
x86: mm: init: allocate shadow memory for kasan
x86: Kconfig: enable kernel address sanitizer
mm: page_alloc: add kasan hooks on alloc and free pathes
mm: Makefile: kasan: don't instrument slub.c and slab_common.c files
mm: slab: share virt_to_cache() between slab and slub
mm: slub: share slab_err and object_err functions
mm: util: move krealloc/kzfree to slab_common.c
mm: slub: add allocation size field to struct kmem_cache
mm: slub: kasan: disable kasan when touching unaccessible memory
mm: slub: add kernel address sanitizer hooks to slub allocator
arm: boot: compressed: disable kasan's instrumentation
arm: add kasan hooks fort memcpy/memmove/memset functions
arm: mm: reserve shadow memory for kasan
arm: Kconfig: enable kernel address sanitizer
fs: dcache: manually unpoison dname after allocation to shut up
kasan's reports
lib: add kmalloc_bug_test module
Documentation/kasan.txt | 224 ++++++++++++++++++++
Makefile | 8 +-
arch/arm/Kconfig | 1 +
arch/arm/boot/compressed/Makefile | 2 +
arch/arm/include/asm/string.h | 30 +++
arch/arm/mm/init.c | 3 +
arch/x86/Kconfig | 1 +
arch/x86/boot/Makefile | 2 +
arch/x86/boot/compressed/Makefile | 2 +
arch/x86/include/asm/string_32.h | 28 +++
arch/x86/include/asm/string_64.h | 24 +++
arch/x86/kernel/cpu/Makefile | 3 +
arch/x86/lib/Makefile | 2 +
arch/x86/mm/init.c | 3 +
arch/x86/realmode/Makefile | 2 +-
arch/x86/realmode/rm/Makefile | 1 +
arch/x86/vdso/Makefile | 1 +
commit | 3 +
fs/dcache.c | 3 +
include/linux/kasan.h | 61 ++++++
include/linux/sched.h | 4 +
include/linux/slab.h | 19 +-
include/linux/slub_def.h | 5 +
init/main.c | 3 +-
lib/Kconfig.debug | 10 +
lib/Kconfig.kasan | 22 ++
lib/Makefile | 1 +
lib/test_kmalloc_bugs.c | 254 +++++++++++++++++++++++
mm/Makefile | 5 +
mm/kasan/Makefile | 3 +
mm/kasan/kasan.c | 420 ++++++++++++++++++++++++++++++++++++++
mm/kasan/kasan.h | 42 ++++
mm/kasan/report.c | 187 +++++++++++++++++
mm/page_alloc.c | 4 +
mm/slab.c | 6 -
mm/slab.h | 25 ++-
mm/slab_common.c | 96 +++++++++
mm/slub.c | 50 ++++-
mm/util.c | 91 ---------
scripts/Makefile.lib | 10 +
40 files changed, 1550 insertions(+), 111 deletions(-)
create mode 100644 Documentation/kasan.txt
create mode 100644 commit
create mode 100644 include/linux/kasan.h
create mode 100644 lib/Kconfig.kasan
create mode 100644 lib/test_kmalloc_bugs.c
create mode 100644 mm/kasan/Makefile
create mode 100644 mm/kasan/kasan.c
create mode 100644 mm/kasan/kasan.h
create mode 100644 mm/kasan/report.c
--
1.8.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
