On 06/13/2014 02:39 AM, Mike Turquette wrote:
> Quoting Tushar Behera (2014-06-12 00:29:23)
>> On Wed, Jun 11, 2014 at 10:20 PM, Mike Turquette <mturque...@linaro.org> 
>> wrote:
>>> Quoting Tushar Behera (2014-06-10 22:32:17)
>>>> When the output clock of AUDSS mux is disabled, we are getting kernel
>>>> oops while doing a clk_get() on other clocks provided by AUDSS. Though
>>>> user manual doesn't specify this dependency, we came across this issue
>>>> while disabling the parent of AUDSS mux clocks.
>>>
>>> Hi Tushar,
>>>
>>> Can you help me understand better what the actual problem is? What is
>>> the root cause of the kernel oops?
>>
>> Currently AUDSS mux has two parents, XXTI crystal and MAU_EPLL clock.
>> As per observation, when the output of AUDSS mux is gated, we are not
>> able to do any operation on the clocks provided by MAU block (mostly
>> the clocks used by ADMA and audio blocks).
> 
> I tried to get a datasheet for Exynos 54xx but could not find it. I even
> looked at the public 5250 data sheet, but it is completely missing
> Chapter 34, "Audio Subsystem", which apparently contains Figure 34-3,
> "Clock names and clock tree diagram of MAUDIO_BLK".
> 
> So without any clue about your hardware (not for lack of trying) I would
> guess that somewhere in the parent hierarchy you have an interface clock
> which must be enabled in order for you to touch the registers pertaining
> to the downstream audio clocks.
> 

Yes, right. As per observation, we need to keep the output of AUDSS mux
enabled to access the registers present in MAU block.

> The right way to handle this requires two steps:
> 
> 1) model your interface clock in the Linux clock framework if you
> haven't already (I assume it is a gate clock, or the child of a gate
> clock)
> 

The interface clock is already part of the clock framework.

> 2) the clk_ops callbacks for the affected audio clocks should wrap their
> operations (i.e. critical secion) with a clk_enable/clk_disable pair,
> where the clock being enables/disable is the interface clock mentioned
> above in #1
> 
> The CCF is reentrant, so you can do this by simply using the top-level
> clk.h API from within your clk_ops callbacks.
> 

Right now, the clocks are registered with clk_register_mux,
clk_register_div and clk_register_gate calls which in turn set
appropriate clk_ops callbacks. If I need to wrap the register access
during these clk_ops callbacks with clk_enable/clk_disable of interface
lock, I would have to reimplement the clk_ops callbacks in
clk-exynos-audss driver.

Is that the approach that you are suggesting?

> I might be totally wrong about the cause of the hang, but that's my best
> guess based on everyone's bug reports.
> 

There are 5 gate clocks within MAU block. While disabling the unused
clocks, if CLK_MAU_EPLL is disabled first, then we are getting this
system hang.


> Regards,
> Mike
> 
>>
>>>
>>> You mention calling clk_get on child clocks of the AUDSS mux fails, but
>>> I cannot imagine why. How can the enable/disable state of a clock affect
>>> the ability to clk_get other clocks?
>>>
>>
>> I might have a little vogue while updating the commit message
>> (mentioning about clk_get which surely is only a s/w operation), but
>> there is definitely some issue with handling those clocks under given
>> scenario.
>>
>> I am on leave till end of this week, so I will update you more with
>> the logs on Monday.
>>
>> Thanks,
>> --
>> Tushar
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 


-- 
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to