The DRA7x has more peripherals with DMA requests than the sDMA can handle:
205 vs 127. All DMA requests are routed through the DMA crossbar, which can
be configured to route selected incoming DMA requests to specific sDMA
request.

Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
 drivers/dma/Kconfig           |   4 +
 drivers/dma/Makefile          |   1 +
 drivers/dma/ti-dma-crossbar.c | 190 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 195 insertions(+)
 create mode 100644 drivers/dma/ti-dma-crossbar.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 074ffad334a7..519657a37ca1 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -247,6 +247,9 @@ config TI_EDMA
          Enable support for the TI EDMA controller. This DMA
          engine is found on TI DaVinci and AM33xx parts.
 
+config TI_DMA_CROSSBAR
+       bool
+
 config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
        bool
 
@@ -332,6 +335,7 @@ config DMA_OMAP
        depends on ARCH_OMAP
        select DMA_ENGINE
        select DMA_VIRTUAL_CHANNELS
+       select TI_DMA_CROSSBAR if SOC_DRA7XX
 
 config DMA_BCM2835
        tristate "BCM2835 DMA engine support"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index bf4485800c60..6ec7af6a416c 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
 obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
 obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
 obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
new file mode 100644
index 000000000000..591307bd4370
--- /dev/null
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -0,0 +1,190 @@
+/*
+ *  Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *  Author: Peter Ujfalusi <peter.ujfal...@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/idr.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+
+#define TI_XBAR_OUTPUTS        127
+#define TI_XBAR_INPUTS 256
+
+static DEFINE_IDR(map_idr);
+
+struct ti_dma_xbar_data {
+       struct dma_router dmarouter;
+       struct regmap *regmap;
+
+       uint safe_val; /* Value to rest the crossbar lines */
+       uint xbar_requests; /* number of DMA requests connected to XBAR */
+       uint dma_requests; /* number of DMA requests forwarded to DMA */
+
+       void __iomem *iomem;
+};
+
+struct ti_dma_xbar_map {
+       int xbar_in;
+       int xbar_out;
+};
+
+static void ti_dma_xbar_free(struct device *dev, void *route_data)
+{
+       struct ti_dma_xbar_data *xbar = dev_get_drvdata(dev);
+       struct ti_dma_xbar_map *map = route_data;
+
+       dev_dbg(dev, "Unmapping XBAR%d (was routed to %d)\n",
+               map->xbar_in, map->xbar_out);
+
+       regmap_write(xbar->regmap, map->xbar_out * 2, 0);
+       idr_remove(&map_idr, map->xbar_out);
+       kfree(map);
+}
+
+static void *ti_dma_xbar_route_allocate(struct of_phandle_args *dma_spec,
+                                       struct of_dma *ofdma)
+{
+       struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+       struct ti_dma_xbar_data *xbar = platform_get_drvdata(pdev);
+       struct ti_dma_xbar_map *map;
+
+       if (dma_spec->args[0] >= xbar->xbar_requests) {
+               dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
+                       dma_spec->args[0]);
+               return NULL;
+       }
+
+       map = kzalloc(sizeof(*map), GFP_KERNEL);
+       if (!map)
+               return NULL;
+
+       map->xbar_out = idr_alloc(&map_idr, NULL, 0, xbar->dma_requests,
+                                 GFP_KERNEL);
+       map->xbar_in = dma_spec->args[0];
+
+       /* The DMA request is 1 based in sDMA */
+       dma_spec->args[0] = map->xbar_out + 1;
+
+       dev_dbg(&pdev->dev, "Mapping XBAR%d to DMA%d\n",
+               map->xbar_in, map->xbar_out);
+
+       regmap_write(xbar->regmap, map->xbar_out * 2, map->xbar_in);
+
+       return map;
+}
+
+static const struct regmap_config ti_dma_xbar_regmap_config = {
+       .reg_bits = 32,
+       .reg_stride = 2,
+       .val_bits = 16,
+       .max_register = 0xfc,
+       .cache_type = REGCACHE_FLAT,
+};
+
+static int ti_dma_xbar_probe(struct platform_device *pdev)
+{
+       struct device_node *node = pdev->dev.of_node;
+       struct device_node *dma_node;
+       struct ti_dma_xbar_data *xbar;
+       struct resource *res;
+       void __iomem *iomem;
+       int i, ret;
+
+       if (!node)
+               return -ENODEV;
+
+       dma_node = of_parse_phandle(node, "dma-device", 0);
+       if (!dma_node) {
+               dev_err(&pdev->dev, "Can't get target DMA node\n");
+               return -ENODEV;
+       }
+
+       xbar = devm_kzalloc(&pdev->dev, sizeof(*xbar), GFP_KERNEL);
+       if (!xbar)
+               return -ENOMEM;
+
+       if (of_property_read_u32(dma_node, "dma-requests",
+                                &xbar->dma_requests)) {
+               dev_info(&pdev->dev,
+                        "Missing XBAR output information, using %u.\n",
+                        TI_XBAR_OUTPUTS);
+               xbar->dma_requests = TI_XBAR_OUTPUTS;
+       }
+       of_node_put(dma_node);
+
+       if (of_property_read_u32(node, "dma-requests", &xbar->xbar_requests)) {
+               dev_info(&pdev->dev,
+                        "Missing XBAR input information, using %u.\n",
+                        TI_XBAR_INPUTS);
+               xbar->xbar_requests = TI_XBAR_INPUTS;
+       }
+
+       if (of_property_read_u32(node, "ti,dma-safe-map", &xbar->safe_val))
+               xbar->safe_val = 0;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res)
+               return -ENODEV;
+
+       if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+                                    dev_name(&pdev->dev)))
+               return -ENODEV;
+
+       iomem = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+       if (!iomem)
+               return -ENOMEM;
+
+       xbar->regmap = devm_regmap_init_mmio(&pdev->dev, iomem,
+                                           &ti_dma_xbar_regmap_config);
+       if (IS_ERR(xbar->regmap)) {
+               dev_err(&pdev->dev, "regmap init failed\n");
+               return PTR_ERR(xbar->regmap);
+       }
+       xbar->iomem = iomem;
+
+       xbar->dmarouter.dev = &pdev->dev;
+       xbar->dmarouter.route_free = ti_dma_xbar_free;
+
+       platform_set_drvdata(pdev, xbar);
+
+       ret = of_dma_router_register(node, ti_dma_xbar_route_allocate,
+                                    &xbar->dmarouter);
+       if (ret)
+               return -ENODEV;
+
+       /* Reset the crossbar */
+       for (i = 0; i < xbar->dma_requests; i++)
+               regmap_write(xbar->regmap, i * 2, xbar->safe_val);
+
+       return 0;
+}
+
+static const struct of_device_id ti_dma_xbar_match[] = {
+       { .compatible = "ti,dra7-dma-crossbar" },
+       {},
+};
+
+static struct platform_driver ti_dma_xbar_driver = {
+       .driver = {
+               .name = "ti-dma-crossbar",
+               .of_match_table = of_match_ptr(ti_dma_xbar_match),
+       },
+       .probe  = ti_dma_xbar_probe,
+};
+
+int omap_dmaxbar_init(void)
+{
+       return platform_driver_register(&ti_dma_xbar_driver);
+}
+arch_initcall(omap_dmaxbar_init);
-- 
2.3.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to