On 07/05/2012 04:14 PM, Marx wrote:
Maybe i did something wrong because I'm new to git, so below are steps i
followed to compile new driver set:
1) git clone git://linuxtv.org/anttip/media_tree.git
2) git checkout -b pctv452e origin/pctv452e
3) copy config file from 3.4 kernel
4) make menuconfig, check everything seems ok, quit & save
5) build kernel Debian way, and install it, reboot
wuwek:~# uname -a
Linux wuwek 3.5.0-rc5+ #1 SMP Thu Jul 5 09:22:36 CEST 2012 i686 GNU/Linux
wuwek:~# lsusb
Bus 001 Device 002: ID 2304:021f Pinnacle Systems, Inc. PCTV Sat HDTV
Pro BDA Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
wuwek:~/pctv/pctv452e/media_tree# ls /dev/dvb*
ls: nie ma dostępu do /dev/dvb*: Nie ma takiego pliku ani katalogu
So, while device is recognized, and a driver seems to recognize device,
there is no /dev/dvb* devices, so something went wrong.
What can I do more?
Marx
Ps. I'm attaching dmesg output. The second dvb card is internal Prof
Revolution 8000.
I didn't load whole driver. Test load it manually first using modprobe
dvb_usb_pctv452e
Check if those modules are enabled, in file .config
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_PCTV452E=m
use make menuconfig to enable if disabled. Then make && make
install_modules && make install as usually.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
