Dne 26.2.2014 14:33, Antti Palosaari napsal(a):
Moikka!

On 21.02.2014 15:06, kap...@mizera.cz wrote:
Hello,

== Antti:

May I ask, if you have the same one stick?
Does it work without problems ?

I don't have just similar stick, but I tested 1-2 sticks having that
same chipset. No problems at all.


== everybody:

I have final tested it under W-XP SP2 with orig drivers and SW.
It goes into problems after some time too, BUT there is a difference: It
is able to "recover" from it itself and it plays again (for some time).

As I wrote - it happens quicker and more frequently on TV channels with
lower/worse signal. That is why I thing that tuner will lose "tuned"
status to exact freq.
Would be not possible to solve this (to re-tune) in driver ? It seems,
that in W-XP is something like that in drivers.


I am pretty sure problem is RF-tuner. It warms and goes off from
frequency a little, which causes signal level drop. As signal goes
weaken, from a point of demodulator, it starts getting decoding errors.

Retune fixes things for a while as tuner is calibrated each time when
tuning is done. If you wait a little longer, demod will lose signal LOCK
and retune is issued - as what happens on windows driver too.

It is possible to add some early re-tune logic to demod driver, but it
does not sound very wise for single problematic device. Also better
approach could be to issue tuner calibration on 5 minute intervals or
so. I am not sure if calibrating tuner is possible at runtime, but it
should be easy to test.

Thats the Problem - I do not know, how to do it without breaking recording. Can You give me a Tip ?
Which command to "recalibrate" ? Tzap breaks it.


Anyhow, I am not going to waste any time for workaround this strange
issue. You are simply only one having it :) Just get new similar stick
and hope it works better.

Of course, I understand. Thanks anyway.



regards
Antti



--kapetr




Regards

--kapetr


xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Hello,

it is this one:
http://www.buyincoins.com/item/30948.html

I shop there often - lowest prices of all China e-shops I have found.
BTW: if you want try the shop - by registry/first buy give my nick
"jipan0" as referrer. You will get 5% off :-)

--kapetr


Dne 10.2.2014 09:34, Antti Palosaari napsal(a):
Moi!

On 10.02.2014 10:21, kap...@mizera.cz wrote:
Hello,

I have test FW version 12.10.04.1
(FYI dmesg changes follows)

The problem without change.

I did want to test the DVB-T stick under Windows XP, but in VirtualBox
works the tuner not at all - I get just jerky sound, no video.
But there is older driver (12.7.6.11) - but don't thing the problem is
there - rather in VBOX.
And no free partition to test.


OK, thank for the testing anyway.
I have few different it9135 devices. Could you find some picture of
yours, I would like to test myself if I had same device.

regards
Antti





Regards.

kapetr


----------- old from
https://raw.github.com/torvalds/linux/master/Documentation/dvb/get_dvb_firmware






[   21.546241] usb 1-1.3: dvb_usb_af9035: prechip_version=83
chip_version=02 chip_type=9135
[   21.546613] usb 1-1.3: dvb_usb_v2: found a 'ITE 9135 Generic' in
cold
state
[   21.563582] usb 1-1.3: dvb_usb_v2: downloading firmware from file
'dvb-usb-it9135-02.fw'
[   21.594974] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   21.659449] usb 1-1.3: dvb_usb_af9035: firmware version=3.39.1.0
[   21.659456] usb 1-1.3: dvb_usb_v2: found a 'ITE 9135 Generic' in
warm
state
[   21.660358] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[   21.660375] DVB: registering new adapter (ITE 9135 Generic)
[   21.750565] i2c i2c-16: af9033: firmware version: LINK=0.0.0.0
OFDM=3.9.1.0
[   21.750570] usb 1-1.3: DVB: registering adapter 0 frontend 0
(Afatech
AF9033 (DVB-T))...
[   22.064646] i2c i2c-16: tuner_it913x: ITE Tech IT913X successfully
attached
[   22.099994] Registered IR keymap rc-it913x-v1
[   22.100068] input: ITE 9135 Generic as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input14
[   22.100103] rc0: ITE 9135 Generic as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0
[   22.100106] usb 1-1.3: dvb_usb_v2: schedule remote query interval to
500 msecs
[   22.100109] usb 1-1.3: dvb_usb_v2: 'ITE 9135 Generic' successfully
initialized and connected
[   22.100123] usbcore: registered new interface driver dvb_usb_af9035

---------------new from
http://palosaari.fi/linux/v4l-dvb/firmware/IT9135/12.10.04.1/IT9135v2_3.42.3.3_3.29.3.3/





Feb  9 15:00:54 zly-hugo kernel: [12732.520617] usb 1-1.3:
dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
Feb  9 15:00:54 zly-hugo kernel: [12732.520988] usb 1-1.3: dvb_usb_v2:
found a 'ITE 9135 Generic' in cold state
Feb  9 15:00:54 zly-hugo kernel: [12732.522267] usb 1-1.3: dvb_usb_v2:
downloading firmware from file 'dvb-usb-it9135-02.fw'
Feb  9 15:00:54 zly-hugo kernel: [12732.626497] usb 1-1.3:
dvb_usb_af9035: firmware version=3.42.3.3
Feb  9 15:00:54 zly-hugo kernel: [12732.626509] usb 1-1.3: dvb_usb_v2:
found a 'ITE 9135 Generic' in warm state
Feb  9 15:00:54 zly-hugo kernel: [12732.627381] usb 1-1.3: dvb_usb_v2:
will pass the complete MPEG2 transport stream to the software demuxer
Feb  9 15:00:54 zly-hugo kernel: [12732.627405] DVB: registering new
adapter (ITE 9135 Generic)
Feb  9 15:00:54 zly-hugo kernel: [12732.631208] i2c i2c-16: af9033:
firmware version: LINK=0.0.0.0 OFDM=3.29.3.3
Feb  9 15:00:54 zly-hugo kernel: [12732.631215] usb 1-1.3: DVB:
registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
Feb  9 15:00:54 zly-hugo kernel: [12732.631328] i2c i2c-16:
tuner_it913x: ITE Tech IT913X successfully attached
--------------




Dne 9.2.2014 05:57, Antti Palosaari napsal(a):
On 09.02.2014 02:42, Antti Palosaari wrote:
Moikka!
I am going to extract new firmware. I dumped init tables out from
Windows driver version 12.07.06.1. Is there any newer?

regards
Antti


I extracted firmwares from Windows driver 12.10.04.1. Didn't find
newer
driver...

http://blog.palosaari.fi/2014/02/linux-it9135-driver-firmwares.html

regards
Antti





--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to