Hi Josh,
Thank you for the patch.
On Thursday 09 April 2015 17:01:48 Josh Wu wrote:
> The master clock should handled by sensor itself.
>
> Signed-off-by: Josh Wu <josh...@atmel.com>
> ---
>
> Changes in v2:
> - totally remove clock_start()/clock_stop() as they are optional.
>
> drivers/media/platform/soc_camera/atmel-isi.c | 45 ------------------------
> 1 file changed, 45 deletions(-)
>
> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
> b/drivers/media/platform/soc_camera/atmel-isi.c index 2b05f89..7bba7d9
> 100644
> --- a/drivers/media/platform/soc_camera/atmel-isi.c
> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> @@ -83,8 +83,6 @@ struct atmel_isi {
> struct completion complete;
> /* ISI peripherial clock */
> struct clk *pclk;
> - /* ISI_MCK, feed to camera sensor to generate pixel clock */
> - struct clk *mck;
> unsigned int irq;
>
> struct isi_platform_data pdata;
> @@ -727,31 +725,6 @@ static void isi_camera_remove_device(struct
> soc_camera_device *icd) icd->devnum);
> }
>
> -/* Called with .host_lock held */
> -static int isi_camera_clock_start(struct soc_camera_host *ici)
> -{
> - struct atmel_isi *isi = ici->priv;
> - int ret;
> -
> - if (!IS_ERR(isi->mck)) {
> - ret = clk_prepare_enable(isi->mck);
> - if (ret) {
> - return ret;
> - }
> - }
> -
> - return 0;
> -}
> -
> -/* Called with .host_lock held */
> -static void isi_camera_clock_stop(struct soc_camera_host *ici)
> -{
> - struct atmel_isi *isi = ici->priv;
> -
> - if (!IS_ERR(isi->mck))
> - clk_disable_unprepare(isi->mck);
> -}
> -
> static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
> {
> struct soc_camera_device *icd = file->private_data;
> @@ -865,8 +838,6 @@ static struct soc_camera_host_ops
> isi_soc_camera_host_ops = { .owner = THIS_MODULE,
> .add = isi_camera_add_device,
> .remove = isi_camera_remove_device,
> - .clock_start = isi_camera_clock_start,
> - .clock_stop = isi_camera_clock_stop,
> .set_fmt = isi_camera_set_fmt,
> .try_fmt = isi_camera_try_fmt,
> .get_formats = isi_camera_get_formats,
> @@ -904,7 +875,6 @@ static int atmel_isi_probe_dt(struct atmel_isi *isi,
>
> /* Default settings for ISI */
> isi->pdata.full_mode = 1;
> - isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
You can also remove the #define ISI_DEFAULT_MCLK_FREQ at the beginning of this
file.
With this fixed,
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
>
> np = of_graph_get_next_endpoint(np, NULL);
> @@ -980,21 +950,6 @@ static int atmel_isi_probe(struct platform_device
> *pdev) INIT_LIST_HEAD(&isi->video_buffer_list);
> INIT_LIST_HEAD(&isi->dma_desc_head);
>
> - /* ISI_MCK is the sensor master clock. It should be handled by the
> - * sensor driver directly, as the ISI has no use for that clock. Make
> - * the clock optional here while platforms transition to the correct
> - * model.
> - */
> - isi->mck = devm_clk_get(dev, "isi_mck");
> - if (!IS_ERR(isi->mck)) {
> - /* Set ISI_MCK's frequency, it should be faster than pixel
> - * clock.
> - */
> - ret = clk_set_rate(isi->mck, isi->pdata.mck_hz);
> - if (ret < 0)
> - return ret;
> - }
> -
> isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
> sizeof(struct fbd) * MAX_BUFFER_NUM,
> &isi->fb_descriptors_phys,
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
