The data timeout gives the minimum amount of time that should be
waited before timing out if no data is received from the card.
Simply dividing the nanosecond part by 1000 does not give this
required guarantee, since such a division rounds down. Use
DIV_ROUND_UP() to give the desired timeout.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
drivers/mmc/host/sdhci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9ecac99ae7e2..82e799fde113 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -630,7 +630,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host,
struct mmc_command *cmd)
if (!data)
target_timeout = cmd->busy_timeout * 1000;
else {
- target_timeout = data->timeout_ns / 1000;
+ target_timeout = DIV_ROUND_UP(data->timeout_ns, 1000);
if (host->clock)
target_timeout += data->timeout_clks / host->clock;
}
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
