On Thu, Mar 04, 2010 at 09:28:41AM +0100, Jens Künzer wrote:
> Resubmitting this with hopefully proper signoff:
>
> This is a patch for a old IBM Thinkpad 760ED notebook.
>
> The pci irq pin of the ti1130 pcmcia bridge is not connected.
> To use the cardbus, the irq has to be routed to an isa irq.
> This patch detects an valid irq and route cardbus interupts to isa instead of
> pci.
> (If a valid pci irq is detected it should use it and not the isa irq.)
>
> I have tested it in my laptop only. I tested a ethernet and a usb cardbus
> card. Both OK
> I also inserted but don't realy used a old pcmcia modem card. It detected the
> irq correct.
>
> Maybe some of you can test this patch on other hardware.
> And please review the changes, especially those in yenta_socket.c
> I am not sure about these changes not breaking other ti pcmcia bridges.
>
> Signed-off-by: Jens Kuenzer <jens.kuen...@fpga.homeip.net>
Many thanks! I've split it up into three parts and only made a few cleanups.
It would be great if you (and others) could check those out.
Best,
Dominik
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
