Andreas-Sokov wrote:
Hello, Neil.
.....
Possible you have bad memory, or a bad CPU, or you are overclocking
the CPU, or it is getting hot, or something.
As seems to me all my problems has been started after i have started update
MDADM.
This is server worked normaly (but only not like soft-raid) more 2-3 years.
Last 6 months it worked as soft-raid. All was normaly, Even I have added
successfully
4th hdd into raid5 )when it stared was 3 hdd). And then Reshaping have been
passed fine.
Yesterday i have did memtest86 onto it server and 10 passes was WITH OUT any
errors.
Temperature of server is about 25 grad celsius.
No overlocking, all set to default.
What did you find when you loaded the module with gdb as Neil suggested?
If the code in the module doesn't match the code in memory you have a
hardware error. memtest86 is a useful tool, but it is not a definitive
test because it doesn't use all CPUs and do i/o at the same time to load
the memory bus.
Realy i do not know what to do because off wee nedd grow our storage, and we
can not.
unfortunately, At this moment - Mdadm do not help us in this decision, but very
want
it get.
I would pull out half my memory and retest. If it still fails I would
swap to the other half of memory. If that didn't show a change I would
check that the code in the module is what Neil showed in his last
message (I assume you already have), and then reseat all of the cables, etc.
I agree with Neil:
But you clearly have a hardware error.
NeilBrown
--
Bill Davidsen <[EMAIL PROTECTED]>
"Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
