----- Original Message -----
> From: "Laurence Oberman" <lober...@redhat.com>
> To: "Himanshu Madhani" <himanshu.madh...@cavium.com>
> Cc: "Chad Dupuis" <chad.dup...@cavium.com>, "Linux SCSI List"
> <linux-scsi@vger.kernel.org>
> Sent: Monday, March 13, 2017 12:54:12 PM
> Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based 8Gb)
> with BAR 3 error, work fine on 4.9
>
>
>
> ----- Original Message -----
> > From: "Himanshu Madhani" <himanshu.madh...@cavium.com>
> > To: "Laurence Oberman" <lober...@redhat.com>, "Chad Dupuis"
> > <chad.dup...@cavium.com>
> > Cc: "Linux SCSI List" <linux-scsi@vger.kernel.org>
> > Sent: Monday, March 13, 2017 12:39:03 PM
> > Subject: RE: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based
> > 8Gb) with BAR 3 error, work fine on 4.9
> >
> > Hi Laurence,
> >
> > > -----Original Message-----
> > > From: Laurence Oberman [mailto:lober...@redhat.com]
> > > Sent: Sunday, March 12, 2017 11:31 AM
> > > To: Dupuis, Chad <chad.dup...@cavium.com>; Madhani, Himanshu
> > > <himanshu.madh...@cavium.com>
> > > Cc: Linux SCSI List <linux-scsi@vger.kernel.org>
> > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based
> > > 8Gb)
> > > with BAR 3 error, work fine on 4.9
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Laurence Oberman" <lober...@redhat.com>
> > > > To: "Chad Dupuis" <chad.dup...@cavium.com>, "Himanshu Madhani"
> > > > <himanshu.madh...@cavium.com>
> > > > Cc: "Linux SCSI List" <linux-scsi@vger.kernel.org>
> > > > Sent: Sunday, March 12, 2017 7:39:23 AM
> > > > Subject: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based
> > > > 8Gb) with BAR 3 error, work fine on 4.9
> > > >
> > > > Chad, Himanshu
> > > >
> > > > Before I bisect or go chase changes, wanted to reach out because the
> > > > driver seems to be the same version.
> > > > Perhaps this is a PCIE change in the kernel for 4.10 affecting the
> > > > load.
> > > > Its the same targetLIO server I have been using for a long time with
> > > > 4.9
> > > >
> > > > 27:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to
> > > > PCI Express HBA (rev 02)
> > > >
> > > > With 4.9 I have no issues loading the driver for my targetLIO server.
> > > > (DL380G8)
> > > >
> > > > # modinfo qla2xxx | more
> > > > filename:
> > > > /lib/modules/4.9.0.lobetcm+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> > > > firmware: ql2500_fw.bin
> > > > version: 8.07.00.38-k
> > > > license: GPL
> > > > description: QLogic Fibre Channel HBA Driver
> > > > author: QLogic Corporation
> > > > srcversion: 94A8431A85BFF854B97B02D
> > > >
> > > > [ 8.906351] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA
> > > > Driver: 8.07.00.38-k.
> > > > [ 10.014052] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 106
> > > > iobase
> > > > 0xffffadce989a1000.
> > > > [ 10.455108] scsi host4: qla2xxx
> > > > [ 10.460206] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 -
> > > > PCI-Express
> > > > Dual Channel 8Gb Fibre Channel HBA.
> > > > [ 10.460215] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe (5.0GT/s
> > > > x8)
> > > > @
> > > > 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5).
> > > > [ 10.460545] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 110
> > > > iobase
> > > > 0xffffadce989a9000.
> > > > [ 10.662120] scsi host5: qla2xxx
> > > > [ 11.007841] qla2xxx [0000:27:00.1]-00fb:5: QLogic QLE2562 -
> > > > PCI-Express
> > > > Dual Channel 8Gb Fibre Channel HBA.
> > > > [ 11.007849] qla2xxx [0000:27:00.1]-00fc:5: ISP2532: PCIe (5.0GT/s
> > > > x8)
> > > > @
> > > > 0000:27:00.1 hdma+ host#=5 fw=8.03.00 (90d5).
> > > >
> > > > Rebooting on the same server with 4.10 fails to load
> > > >
> > > > Linux 4.10.0+
> > > > # modinfo qla2xxx | more
> > > > filename:
> > > > /lib/modules/4.10.0+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> > > > firmware: ql2500_fw.bin
> > > > version: 8.07.00.38-k
> > > > license: GPL
> > > > description: QLogic Fibre Channel HBA Driver
> > > > author: QLogic Corporation
> > > > srcversion: 939E0595E8A3C2E1BE94392
> > > >
> > > > [ 8.754040] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA
> > > > Driver: 8.07.00.38-k.
> > > > [ 9.979523] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
> > > > [ 10.201268] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 110
> > > > iobase
> > > > 0xffffacbf189b1000.
> > > > [ 10.407865] scsi host5: qla2xxx
> > > > [ 10.444281] qla2xxx: probe of 0000:27:00.0 failed with error -22
> > > > [ 10.444519] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
> > > > [ 10.444522] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 110
> > > > iobase
> > > > 0xffffacbf189b9000.
> > > > [ 10.645932] scsi host5: qla2xxx
> > > > [ 10.682233] qla2xxx: probe of 0000:27:00.1 failed with error -22
> > > >
> > > > Thanks
> > > > Laurence
> > > >
> > >
> > > I started bisecting this, cannot believe others have not bumped into this
> > > on
> > > 4.10.
> > > This is a generic QLE2562 and firmware is loaded by the driver so
> > > wondering
> > > why I am seeing this and other are not.
> > > There is nothing special with the PCIE bus on this DL380G8.
> > >
> > > Anyway during the bisect I got to a point where in the 4.10 commits I
> > > still
> > > saw
> > > the "BAR 3" message but the probe worked.
> > >
> > > [ 7.208237] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA
> > > Driver:
> > > 8.07.00.38-k.
> > > [ 7.208492] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
> > >
> > > see this above but probe did not fail
> > >
> > > [ 7.208494] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 97
> > > iobase
> > > 0xffffc02f98989000.
> > > [ 7.414738] scsi host4: qla2xxx
> > >
> > > [ 7.419267] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 -
> > > PCI-Express
> > > Dual
> > > Channel 8Gb Fibre Channel HBA.
> > > [ 7.419278] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe (5.0GT/s x8)
> > > @
> > > 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5).
> > > [ 7.419698] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
> > > [ 7.419701] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 100
> > > iobase
> > > 0xffffc02f989b1000.
> > > [ 7.625691] scsi host6: qla2xxx
> > > [ 7.629218] qla2xxx [0000:27:00.1]-00fb:6: QLogic QLE2562 -
> > > PCI-Express
> > > Dual
> > > Channel 8Gb Fibre Channel HBA.
> > > [ 7.629222] qla2xxx [0000:27:00.1]-00fc:6: ISP2532: PCIe (5.0GT/s x8)
> > > @
> > > 0000:27:00.1 hdma+ host#=6
> > >
> > > I marked that still as bad and am continuing, I have 9 builds to go.
> > >
> > > Thanks
> > > Laurence
> >
> > We had send patches to address issues discovered when the PCI Affinity
> > were
> > merged into 4.10 kernel.
> >
> > Can you please check if your tree has following patches (Currently they are
> > included in 4.10.2 stable)
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=699abe249b0e2ca590284424d95490e92ccd6aeb
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=cf9d9110806493e2ea2db7d00a1a991401dfb9d5
> >
> > Also can you apply following patch which addresses issue in PCI layer (This
> > should be included in 4.10 stable branch soon )
> >
> > https://www.spinics.net/lists/linux-pci/msg58742.html
> >
> > Thanks,
> > Himanshu
> >
>
> Hello Himanshu
>
> Many thanks for coming back to me.
> OK, I will test all of this and let you know.
> I dont think I have these and this would explain all this.
>
> Regards
> Laurence
>
Hello Himanshu
This is still failing for me on the HP DL380G8
My Stable tree
root@dhcp40-131 ~]# uname -a
Linux xxxxxx.desklab.eng.bos.redhat.com 4.11.0-rc2+
$ git show 154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c
commit 154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c
Author: Michael Hernandez <michael.hernan...@cavium.com>
Date: Wed Feb 15 15:37:21 2017 -0800
scsi: qla2xxx: Fix Regression introduced by pci_alloc_irq_vectors_affinity
call.
commit 67f2db8792f96d8f7521461635d25f9c80245d80 upstream.
For target mode, we need to increase minimum vectors value by one to
account for ATIO queue.
Following stack trace will be seen
$ git show 699abe249b0e2ca590284424d95490e92ccd6aeb
commit 699abe249b0e2ca590284424d95490e92ccd6aeb
Author: Michael Hernandez <michael.hernan...@cavium.com>
Date: Wed Feb 15 15:37:20 2017 -0800
scsi: qla2xxx: Fix response queue count for Target mode.
commit d0d2c68b759bbf678e078fd0c71b5fde65a9392c upstream.
Target mode initialization was not calculating response queue values
correctly resulting into one less MSI-X vector.
$ git show cf9d9110806493e2ea2db7d00a1a991401dfb9d5
commit cf9d9110806493e2ea2db7d00a1a991401dfb9d5
Author: Michael Hernandez <michael.hernan...@cavium.com>
Date: Wed Feb 15 15:37:19 2017 -0800
scsi: qla2xxx: Cleaned up queue configuration code.
commit f54f2cb540b53d55a81d620e816810d59be5cb1b upstream.
This patch cleaned up queue configuration code, such that once
initialized, we should not touch msix_count value. This will prevent
incorrect numbers of MSI-X vectors requested while performing target
mode configuration.
Tested, and fails
root@dhcp40-131 ~]# dmesg | grep qla
[ 8.007786] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver:
8.07.00.38-k.
[ 9.583949] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
[ 9.583951] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 106 iobase
0xffffb3e4589a1000.
[ 9.788259] scsi host4: qla2xxx
[ 9.824578] qla2xxx: probe of 0000:27:00.0 failed with error -22
[ 9.824824] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
[ 9.824828] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 106 iobase
0xffffb3e4589a9000.
[ 10.030273] scsi host4: qla2xxx
[ 10.066602] qla2xxx: probe of 0000:27:00.1 failed with error -22
Now
Patched
https://www.spinics.net/lists/linux-pci/msg58742.html
[loberman@dhcp40-131 linux-stable]$ patch -p1 < ../patch_pci
patching file drivers/pci/msi.c
Hunk #1 succeeded at 1072 (offset -19 lines).
Hunk #2 succeeded at 1120 (offset -27 lines).
Hunk #3 succeeded at 1200 (offset -27 lines).
Rebuild kernel
Reboot and test
Still fails
[ 8.464491] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver:
8.07.00.38-k.
[ 8.464672] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
[ 8.464675] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 101 iobase
0xffffa3ff58991000.
[ 8.670118] scsi host4: qla2xxx
[ 8.706325] qla2xxx: probe of 0000:27:00.0 failed with error -22
[ 8.706451] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
[ 8.706453] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 101 iobase
0xffffa3ff589a1000.
[ 8.912089] scsi host4: qla2xxx
[ 8.948324] qla2xxx: probe of 0000:27:00.1 failed with error -22
Went to test on another system , HP Microserver G8
Same HBA
Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA
(rev 02)
Works here but complains about the vector count support
[ 8.056438] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver:
8.07.00.38-k.
[ 8.097427] qla2xxx [0000:07:00.0]-001a: : MSI-X vector count: 32.
[ 8.127130] qla2xxx [0000:07:00.0]-001d: : Found an ISP2532 irq 16 iobase
0xffffbd9100c99000.
[ 8.221834] qla2xxx [0000:07:00.0]-00c6:6: MSI-X: Failed to enable support
with 32 vectors, using 4 vectors.
[ 8.759660] scsi host6: qla2xxx
[ 8.760085] qla2xxx [0000:07:00.0]-00fb:6: QLogic HPAJ764A - HP 8Gb Dual
Channel PCI-e 2.0 FC HBA.
[ 8.760092] qla2xxx [0000:07:00.0]-00fc:6: ISP2532: PCIe (5.0GT/s x8) @
0000:07:00.0 hdma+ host#=6 fw=8.03.00 (90d5).
[ 8.760197] qla2xxx [0000:07:00.1]-001a: : MSI-X vector count: 32.
[ 8.760199] qla2xxx [0000:07:00.1]-001d: : Found an ISP2532 irq 17 iobase
0xffffbd9100cb9000.
[ 8.760428] qla2xxx [0000:07:00.1]-00c6:7: MSI-X: Failed to enable support
with 32 vectors, using 4 vectors.
[ 8.999658] scsi host7: qla2xxx
[ 9.000124] qla2xxx [0000:07:00.1]-00fb:7: QLogic HPAJ764A - HP 8Gb Dual
Channel PCI-e 2.0 FC HBA.
[ 9.000130] qla2xxx [0000:07:00.1]-00fc:7: ISP2532: PCIe (5.0GT/s x8) @
0000:07:00.1 hdma+ host#=7 fw=8.03.00 (90d5).
So something about the DL380 here needs to be figured out as well as the MSI-X
messages above.
Earlier kernels up to 4.9.13 are all fine on both servers
Thanks
Laurence
