Any advice, help or pointers would be greatly appreciated.
Here my machine info: ??????? SuSE 8.2 ??????? 2.4.20-4GB
Here the output from /proc/bus/usb/devices T:? Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=? 1 Spd=12? MxCh= 2 B:? Alloc=118/900 us (13%), #Int=? 1, #Iso=? 0 D:? Ver= 1.00 Cls=09(hub? ) Sub=00 Prot=00 MxPS= 8 #Cfgs=? 1 P:? Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=? 0mA I:? If#= 0 Alt= 0 #EPs= 1 Cls=09(hub? ) Sub=00 Prot=00 Driver=hub E:? Ad=81(I) Atr=03(Int.) MxPS=?? 8 Ivl=255ms T:? Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=? 8 Spd=12? MxCh= 0 D:? Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=? 1 P:? Vendor=0830 ProdID=0060 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=? 2mA I:? If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E:? Ad=82(I) Atr=02(Bulk) MxPS=? 64 Ivl=0ms E:? Ad=03(O) Atr=02(Bulk) MxPS=? 64 Ivl=0ms E:? Ad=08(O) Atr=02(Bulk) MxPS=? 64 Ivl=0ms E:? Ad=89(I) Atr=02(Bulk) MxPS=? 64 Ivl=0ms T:? Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=? 2 Spd=1.5 MxCh= 0 D:? Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=? 1 P:? Vendor=046d ProdID=c00b Rev= 6.10 S:? Manufacturer=Logitech S:? Product=USB Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I:? If#= 0 Alt= 0 #EPs= 1 Cls=03(HID? ) Sub=01 Prot=02 Driver=hid E:? Ad=81(I) Atr=03(Int.) MxPS=?? 8 Ivl=10ms
Here's a lsusb -v:
??????? Bus 001 Device 008: ID 0830:0060 Palm, Inc.
? Language IDs: none (invalid length string descriptor bf; len=0) string descriptor 1 invalid (bf bf; len=0) string descriptor 2 invalid (bf bf; len=0) string descriptor 5 invalid (bf bf; len=0) Device Descriptor:
? bLength??????????????? 18
? bDescriptorType???????? 1
? bcdUSB?????????????? 1.10
? bDeviceClass??????????? 0 Interface
? bDeviceSubClass???????? 0
? bDeviceProtocol???????? 0
? bMaxPacketSize0??????? 64
? idVendor?????????? 0x0830 Palm, Inc.
? idProduct????????? 0x0060
? bcdDevice??????????? 1.00
? iManufacturer?????????? 1
? iProduct??????????????? 2
? iSerial???????????????? 5
? bNumConfigurations????? 1
Warning: invalid config descriptor
? junk at config descriptor end: 00 02 19 00 01 01 00 40 00 09 04 00 00 01 09 00 00 00 07 05 81 03 08 00 ff
? Language IDs: none (invalid length string descriptor bf; len=0) ˆ?
Here are the error messages from /var/log/messages:
???????
Jul 29 11:08:51 powerline kernel: usb.c: string descriptor 0 too short
Jul 29 11:08:51 powerline last message repeated 8 times
Jul 29 11:09:24 powerline kernel: usb-uhci.c: interrupt, status 2, frame# 946
Jul 29 11:09:24 powerline kernel: usb.c: string descriptor 0 too short
Jul 29 11:09:24 powerline last message repeated 8 times
Jul 29 11:10:01 powerline kernel: usb-uhci.c: interrupt, status 2, frame# 1332
Jul 29 11:10:01 powerline kernel: usbdevfs: process 3452 (lsusb) did not claim interface 0 before use
Jul 29 11:10:51 powerline kernel: usb.c: USB disconnect on device 00:02.2-1 address 6
And some more:
Jul 29 11:11:56 powerline kernel: hub.c: new USB device 00:02.2-1, assigned address 7
Jul 29 11:11:56 powerline kernel: usbserial.c: Handspring Visor / Palm 4.0 / Clié 4.x converter detected
Jul 29 11:11:56 powerline kernel: usb-uhci.c: ENXIO 80000780, flags 0, urb c25dcb20, burb c25dc7a0
Jul 29 11:11:56 powerline kernel: usb.c: error getting string descriptor 0 (error=-6)
Jul 29 11:11:56 powerline kernel: usb-uhci.c: ENXIO 80000780, flags 0, urb c25dcb20, burb c25dc7a0
Jul 29 11:11:56 powerline kernel: usb.c: error getting string descriptor 0 (error=-6) Jul 29 11:12:02 powerline /etc/hotplug usb.agent[3506]: Warning: invalid config descriptor
Jul 29 11:12:02 powerline /etc/hotplug/usb.agent[3506]: Config 0 descriptor too long, truncating
Jul 29 11:12:02 powerline /etc/hotplug/usb.agent[3506]: Warning: invalid config descriptor ...
Jul 29 11:12:02 powerline /etc/hotplug/usb.agent[3506]: Config 0 descriptor too long, truncating
Jul 29 11:12:02 powerline kernel: usb.c: string descriptor 0 too short
Jul 29 11:12:02 powerline last message repeated 8 times
Jul 29 11:14:06 powerline kernel: usb.c: USB disconnect on device 00:02.2-1 address 7
Jul 29 11:14:06 powerline kernel: usbserial.c: Handspring Visor / Palm 4.0 / Clié 4.x converter now disconnected from ttyUSB0
Jul 29 11:14:06 powerline kernel: usbserial.c: Handspring Visor / Palm 4.0 / Clié 4.x converter now disconnected from ttyUSB1
------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users