Hello List, I installed the internal card reader ucr-61s2b on my asus a7v board.
I guess I can see it: cat /proc/scsi/scsi says:_ Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: PLEXTOR Model: CD-R PX-R412C Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IC Model: USB Storage-CFC Rev: 301b Type: Direct-Access ANSI SCSI revision: 02
But, is this the right vendor etc?
From my /proc/partitions I see
--snip--
8 0 4233600 sda 40346 97361 1101642 455190 4588 29315 271608 611680 0 395720 1067870
8 1 4233200 sda1 40345 97358 1101634 455180 4588 29315 271608 611680 0 395710 1067860
8 16 15744 sdb 1 3 8 10 0 0 0 0 0 10 10
8 17 15664 sdb1 0 0 0 0 0 0 0 0 0 0 0
--snip--
That it is the device /dev/sdb...
But, how do I have to mount it? When I try to mount /dev/sdb or /dev/sdb1 the mount commant hangs. When I try to use the sg3_utils sg_scan or sg_map they are hanging, too.
I am using the rh9 kernel 2.4.20-8
Thanks Cornelius
------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
