Hi Stephen, Here is the file content when the device attached. T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=dce0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0c45 ProdID=602a Rev= 1.01 S: Product=USB camera C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 128 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 680 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 800 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 7 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 900 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms I: If#= 0 Alt= 8 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms
Kind Regards, Kunal Sachdeva [EMAIL PROTECTED] schrieb am 12.01.04 18:23:31: > > It doesn't look like the device is attached, all that is there is your > host controller. > > On Mon, 12 Jan 2004, Kunal Sachdeva wrote: > > > > > Hi, > > > > To be on the safer side I attached a text doc. Please have a look. > > > > Regards, > > > > Kunal > > > > > > > > [EMAIL PROTECTED] schrieb am 12.01.04 16:13:26: > > > > > > Your mailer seems to have put that all on one line. Can you try again? > > > > > > On Mon, 12 Jan 2004, Kunal Sachdeva wrote: > > > > > > > > > > > Hi Stephen, > > > > > > > > Thanks for your reply.Here is what I get from /proc/bus/usb/devices. > > > > > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4B: > > Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0D: Ver= 2.00 Cls=09(hub ) Sub=00 > > Prot=01 MxPS= 8 #Cfgs= 1P: Vendor=0000 ProdID=0000 Rev= 2.04S: > > Manufacturer=Linux 2.4.18-14 ehci-hcdS: Product=VIA Technologies, Inc. > > USB 2.0S: SerialNumber=00:14.2C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mAI: > > If#= 0 Alt= 0! #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hubE: Ad=81(I) > > Atr=03(Int.) MxPS= 2 Ivl=256ms > > > > > > > > Awaiting for the response. > > > > > > > > Kunal > > > > > > > > [EMAIL PROTECTED] schrieb am 09.01.04 20:36:35: > > > > > > > > > > Please send the contents of /proc/bus/usb/devices. That will > > probably > > > > say > > > > > this is a vendor defined protocol. > > > > > > > > > > On Fri, 9 Jan 2004, Kunal Sachdeva wrote: > > > > > > > > > > &g! t; Hi Group, > > > > > > We have bought a new telescope from MEADE Model Number ETX-105EC > > and > > > > with it is attached a camera with USB interface. > > > > > > I have a Red Hat Linux Distribution 9. As soon is connect the > > device, > > > > these are the messages I am receiving- > > > > > > > > > > > > Jan 9 15:51:00 dhcp6 kernel: hub.c: new USB device 00:07.2-1, > > > > as! signed address 2 > > > > > > Jan 9 15:51:00 dhcp6 kernel: u sb.c: USB device 2 (vend/prod > > > > 0xc45/0x602a) is not claimed by any active driver. > > > > > > Jan 9 15:51:04 dhcp6 usb.agent[4710]: ... no modules for USB > > product > > > > c45/602a/101 > > > > > > > > > > > > I checked the /etc/hotplug/ devices and other rekated files but > > no > > > > help. Could anyone suggest how to compile the module for this type of > > > > scenario. > > > > > > Thanks in advance. > > > > > > Regards, > > > > > > Kunal > > > > > > > > > > > > ______________________________________________________________________________ > > > > > > Erdbeben im Iran: Zehntausende Kinder brauche! n Hilfe. UNICEF > > hilft > > > > den > > > > > > Kindern - helfen Sie mit! https ://www.unicef.de/spe/spe_03.php > > > > > > > > > > > > > > > > > > > > > > > > ----------------------------------------------------! --- > > > > > > This SF.net email is sponsored by: Perforce Software. > > > > > > Perforce is the Fast Software Configuration Management System > > > > offering > > > > > > advanced branching capabilities and atomic changes on 50+ > > platforms. > > > > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > > > > _______________________________________________ > > > > > > [EMAIL PROTECTED] > > > > > > To unsubscribe, use the last form field at: > > > > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > > > > > > > > > > > -- > > > > > /------------------------------------+------------------------- > > > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > > > |http://calendar.yahoo.com/gowdy | Menlo P! ark CA 94025, USA | > > > > >! |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > > > ------------------------------------+-------------------------/ > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > This SF.net email is sponsored by: Perforce Software. > > > > > Perforce is the Fast Software Configuration Management System > > offering > > > > > advanced branching capabilities and atomic changes on 50+ > > platforms. > > > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > > > _______________________________________________ > > > > > [EMAIL PROTECTED] > > > > > To unsubscribe, use the last form field at: > > > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > > > > > ______________________________________________________________________________ > > > > Nachrichten, Musik und Spiele schnell und einfach per Quickstart i! m > > > > WEB.DE Screensaver - Gratis downloaden: > > > > http://screensaver.web.de/?mc=021110 > > > > > > > > > > -- > > > /------------------------------------+------------------------- > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > ------------------------------------+-------------------------/ > > > > ______________________________________________________________________________ > > Erdbeben im Iran: Zehntausende Kinder brauchen Hilfe. UNICEF hilft den > > Kindern - helfen Sie mit! https://www.unicef.de/spe/spe_03.php > > > > -- > /------------------------------------+------------------------- > |Stephen J. Gowdy | SLAC, MailStop 34, | > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > ------------------------------------+-------------------------/ ______________________________________________________________________________ Erdbeben im Iran: Zehntausende Kinder brauchen Hilfe. UNICEF hilft den Kindern - helfen Sie mit! https://www.unicef.de/spe/spe_03.php ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
