Hi Stephen, Yaaah ok its a vendor protocol, does that mean we cannot do anything? I mean only the vendor can provide us with the device driver? What about writing the device driver for this particular camera? do you think it will be possible? Your reply would help a lot. Thanks Kunal
[EMAIL PROTECTED] schrieb am 15.01.04 14:14:26: > > Yeah, it is a vendor protocol. > > On Thu, 15 Jan 2004, Kunal Sachdeva wrote: > > > Hi Stephen, > > Here is the file content when the device attached. > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > S: Product=USB UHCI Root Hub > > S: SerialNumber=dce0 > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > P: Vendor=0c45 ProdID=602a Rev= 1.01 > > S: Product=USB camera > > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 128 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 680 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 800 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 7 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS= 900 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > I: If#= 0 Alt= 8 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=100ms > > > > Kind Regards, > > Kunal Sachdeva > > > > > > [EMAIL PROTECTED] schrieb am 12.01.04 18:23:31: > > > > > > It doesn't look like the device is attached, all that is there is your > > > host controller. > > > > > > On Mon, 12 Jan 2004, Kunal Sachdeva wrote: > > > > > > > > > > > Hi, > > > > > > > > To be on the safer side I attached a text doc. Please have a look. > > > > > > > > Regards, > > > > > > > > Kunal > > > > > > > > > > > > > > > > [EMAIL PROTECTED] schrieb am 12.01.04 16:13:26: > > > > > > > > > > Your mailer seems to have put that all on one line. Can you try again? > > > > > > > > > > On Mon, 12 Jan 2004, Kunal Sachdeva wrote: > > > > > > > > > > > > > > > > > Hi Stephen, > > > > > > > > > > > > Thanks for your reply.Here is what I get from /proc/bus/usb/devices. > > > > > > > > > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4B: > > > > Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0D: Ver= 2.00 Cls=09(hub ) Sub=00 > > > > Prot=01 MxPS= 8 #Cfgs= 1P: Vendor=0000 ProdID=0000 Rev= 2.04S: > > > > Manufacturer=Linux 2.4.18-14 ehci-hcdS: Product=VIA Technologies, Inc. > > > > USB 2.0S: SerialNumber=00:14.2C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mAI: > > > > If#= 0 Alt= 0! #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hubE: Ad=81(I) > > > > Atr=03(Int.) MxPS= 2 Ivl=256ms > > > > > > > > > > > > Awaiting for the response. > > > > > > > > > > > > Kunal > > > > > > > > > > > > [EMAIL PROTECTED] schrieb am 09.01.04 20:36:35: > > > > > > > > > > > > > > Please send the contents of /proc/bus/usb/devices. That will > > > > probably > > > > > > say > > > > > > > this is a vendor defined protocol. > > > > > > > > > > > > > > On Fri, 9 Jan 2004, Kunal Sachdeva wrote: > > > > > > > > > > > > > > &g! t; Hi Group, > > > > > > > > We have bought a new telescope from MEADE Model Number ETX-105EC > > > > and > > > > > > with it is attached a camera with USB interface. > > > > > > > > I have a Red Hat Linux Distribution 9. As soon is connect the > > > > device, > > > > > > these are the messages I am receiving- > > > > > > > > > > > > > > > > Jan 9 15:51:00 dhcp6 kernel: hub.c: new USB device 00:07.2-1, > > > > > > as! signed address 2 > > > > > > > > Jan 9 15:51:00 dhcp6 kernel: u sb.c: USB device 2 (vend/prod > > > > > > 0xc45/0x602a) is not claimed by any active driver. > > > > > > > > Jan 9 15:51:04 dhcp6 usb.agent[4710]: ... no modules for USB > > > > product > > > > > > c45/602a/101 > > > > > > > > > > > > > > > > I checked the /etc/hotplug/ devices and other rekated files but > > > > no > > > > > > help. Could anyone suggest how to compile the module for this type of > > > > > > scenario. > > > > > > > > Thanks in advance. > > > > > > > > Regards, > > > > > > > > Kunal > > > > > > > > > > > > > > > > > > ______________________________________________________________________________ > > > > > > > > Erdbeben im Iran: Zehntausende Kinder brauche! n Hilfe. UNICEF > > > > hilft > > > > > > den > > > > > > > > Kindern - helfen Sie mit! https ://www.unicef.de/spe/spe_03.php > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ----------------------------------------------------! --- > > > > > > > > This SF.net email is sponsored by: Perforce Software. > > > > > > > > Perforce is the Fast Software Configuration Management System > > > > > > offering > > > > > > > > advanced branching capabilities and atomic changes on 50+ > > > > platforms. > > > > > > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > > > > > > _______________________________________________ > > > > > > > > [EMAIL PROTECTED] > > > > > > > > To unsubscribe, use the last form field at: > > > > > > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > /------------------------------------+------------------------- > > > > > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > > > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > > > > > |http://calendar.yahoo.com/gowdy | Menlo P! ark CA 94025, USA | > > > > > > >! |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > > > > > ------------------------------------+-------------------------/ > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > > This SF.net email is sponsored by: Perforce Software. > > > > > > > Perforce is the Fast Software Configuration Management System > > > > offering > > > > > > > advanced branching capabilities and atomic changes on 50+ > > > > platforms. > > > > > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > > > > > _______________________________________________ > > > > > > > [EMAIL PROTECTED] > > > > > > > To unsubscribe, use the last form field at: > > > > > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > > > > > > > > > > > ______________________________________________________________________________ > > > > > > Nachrichten, Musik und Spiele schnell und einfach per Quickstart i! m > > > > > > WEB.DE Screensaver - Gratis downloaden: > > > > > > http://screensaver.web.de/?mc=021110 > > > > > > > > > > > > > > > > -- > > > > > /------------------------------------+------------------------- > > > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > > > ------------------------------------+-------------------------/ > > > > > > > > ______________________________________________________________________________ > > > > Erdbeben im Iran: Zehntausende Kinder brauchen Hilfe. UNICEF hilft den > > > > Kindern - helfen Sie mit! https://www.unicef.de/spe/spe_03.php > > > > > > > > > > -- > > > /------------------------------------+------------------------- > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > ------------------------------------+-------------------------/ > > > > > > ______________________________________________________________________________ > > Erdbeben im Iran: Zehntausende Kinder brauchen Hilfe. UNICEF hilft den > > Kindern - helfen Sie mit! https://www.unicef.de/spe/spe_03.php > > > > -- > /------------------------------------+-------------------------\ > |Stephen J. Gowdy | SLAC, MailStop 34, | > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > \------------------------------------+-------------------------/ > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users ______________________________________________________________________________ Erdbeben im Iran: Zehntausende Kinder brauchen Hilfe. UNICEF hilft den Kindern - helfen Sie mit! https://www.unicef.de/spe/spe_03.php ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
