The USB connections to my keyboard and anything connected to it's built in hub keep getting reset. Here's the syslog with USB debugging. Can anyone tell me what is going on here? Or better yet, how can I stop it from happening?
May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97640 path 2.1 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b976c0 path 2 ep1in 5f160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: hub 3-2:1.0: transfer --> -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97640 path 2.1 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97640 path 2.1 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b976c0 path 2 ep1in 5f160000 cc 5 --> status -110 May 11 12:10:47 sylph kernel: hub 3-2:1.0: transfer --> -110 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97640 path 2.1 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97340 path 2.3 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: urb c1b97640 path 2.1 ep1in 5e160000 cc 5 --> status -110 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00020101 PESC PPS CCS May 11 12:10:53 sylph kernel: hub 3-0:1.0: port 2 enable change, status 101 May 11 12:10:53 sylph kernel: hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling...<7>hub 3-0:1.0: port 2, status 101, change 2, 12 Mb/s May 11 12:10:53 sylph kernel: usb 3-2: USB disconnect, address 3 May 11 12:10:53 sylph kernel: usb 3-2.1: USB disconnect, address 4 May 11 12:10:53 sylph kernel: usb 3-2.1: usb_disable_device nuking all URBs May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: shutdown urb c1b97640 pipe 40408480 ep1in-intr May 11 12:10:53 sylph kernel: usb 3-2.1: unregistering interface 3-2.1:1.0 May 11 12:10:53 sylph kernel: usb 3-2.1: unregistering device May 11 12:10:53 sylph kernel: usb 3-2.3: USB disconnect, address 5 May 11 12:10:53 sylph kernel: usb 3-2.3: usb_disable_device nuking all URBs May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: shutdown urb c1b97340 pipe 40408580 ep1in-intr May 11 12:10:53 sylph kernel: usb 3-2.3: unregistering interface 3-2.3:1.0 May 11 12:10:53 sylph kernel: usb 3-2.3: unregistering device May 11 12:10:53 sylph kernel: usb 3-2: usb_disable_device nuking all URBs May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: shutdown urb c1b976c0 pipe 40408380 ep1in-intr May 11 12:10:53 sylph kernel: usb 3-2: unregistering interface 3-2:1.0 May 11 12:10:53 sylph kernel: usb 3-2: unregistering device May 11 12:10:53 sylph kernel: hub 3-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 May 11 12:10:53 sylph kernel: ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS May 11 12:10:53 sylph kernel: usb 3-2: new full speed USB device using address 6 May 11 12:10:53 sylph kernel: usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 May 11 12:10:53 sylph kernel: drivers/usb/core/message.c: USB device number 6 default language ID 0x409 May 11 12:10:53 sylph kernel: usb 3-2: Product: Generic USB Hub May 11 12:10:53 sylph kernel: usb 3-2: Manufacturer: Chicony May 11 12:10:53 sylph kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) May 11 12:10:53 sylph kernel: hub 3-2:1.0: usb_probe_interface May 11 12:10:53 sylph kernel: hub 3-2:1.0: usb_probe_interface - got id May 11 12:10:53 sylph kernel: hub 3-2:1.0: USB hub found May 11 12:10:53 sylph kernel: hub 3-2:1.0: 3 ports detected May 11 12:10:53 sylph kernel: hub 3-2:1.0: compound device; port removable status: FRR May 11 12:10:53 sylph kernel: hub 3-2:1.0: individual port power switching May 11 12:10:53 sylph kernel: hub 3-2:1.0: individual port over-current protection May 11 12:10:53 sylph kernel: hub 3-2:1.0: Port indicators are not supported May 11 12:10:53 sylph kernel: hub 3-2:1.0: power on to power good time: 100ms May 11 12:10:53 sylph kernel: hub 3-2:1.0: hub controller current requirement: 90mA May 11 12:10:53 sylph kernel: hub 3-2:1.0: local power source is good May 11 12:10:53 sylph kernel: hub 3-2:1.0: no over-current condition exists May 11 12:10:53 sylph kernel: hub 3-2:1.0: enabling power on all ports May 11 12:10:53 sylph kernel: hub 3-2:1.0: port 1, status 101, change 1, 12 Mb/s May 11 12:10:53 sylph kernel: hub 3-2:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 May 11 12:10:53 sylph kernel: usb 3-2.1: new full speed USB device using address 7 May 11 12:10:53 sylph kernel: usb 3-2.1: new device strings: Mfr=3, Product=4, SerialNumber=0 May 11 12:10:53 sylph kernel: drivers/usb/core/message.c: USB device number 7 default language ID 0x409 May 11 12:10:53 sylph kernel: usb 3-2.1: Product: PFU-65 USB Keyboard May 11 12:10:53 sylph kernel: usb 3-2.1: Manufacturer: Chicony May 11 12:10:53 sylph kernel: usb 3-2.1: registering 3-2.1:1.0 (config #1, interface 0) May 11 12:10:53 sylph kernel: hid 3-2.1:1.0: usb_probe_interface May 11 12:10:53 sylph kernel: hid 3-2.1:1.0: usb_probe_interface - got id May 11 12:10:53 sylph kernel: input: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:02.1-2.1 May 11 12:10:53 sylph kernel: hub 3-2:1.0: port 3, status 301, change 1, 1.5 Mb/s May 11 12:10:53 sylph kernel: hub 3-2:1.0: debounce: port 3: delay 100ms stable 4 status 0x301 May 11 12:10:53 sylph kernel: usb 3-2.3: new low speed USB device using address 8 May 11 12:10:53 sylph kernel: usb 3-2.3: new device strings: Mfr=1, Product=2, SerialNumber=0 May 11 12:10:53 sylph kernel: drivers/usb/core/message.c: USB device number 8 default language ID 0x409 May 11 12:10:53 sylph kernel: usb 3-2.3: Product: USB-PS/2 Optical Mouse May 11 12:10:53 sylph kernel: usb 3-2.3: Manufacturer: Logitech May 11 12:10:53 sylph kernel: usb 3-2.3: registering 3-2.3:1.0 (config #1, interface 0) May 11 12:10:53 sylph kernel: hid 3-2.3:1.0: usb_probe_interface May 11 12:10:53 sylph kernel: hid 3-2.3:1.0: usb_probe_interface - got id May 11 12:10:53 sylph kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2.3 -- Christopher John Purnell | I thought I'd found a reason to live http://www.lost.org.uk/ | Just like before when I was a child --------------------------| Only to find that dreams made of sand What gods do you pray to? | Would just fall apart and slip through my hands ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
