On Tue, Oct 19, 2010 at 10:34:15AM +0200, Emilie wrote: > Hi all, > > I tried to load a program with a size > 64K on the MSP430F5438A with the new > version 0.12 . > But I can't load the program in the flash2. > Is it possible to load the program in the flash2 with this new revision? > > I use this command: > mspdebug -d /dev/com8 uif -j "load example.hex" > > Result: > > Trying to open UIF on /dev/com8... > Initializing FET... > FET protocol version is 20400401 > Configured for JTAG (2) > Set Vcc: 3000 mV > Device ID: 0x0580 > Device: MSP430F5438A > Code memory starts at 0x5c00 > Number of breakpoints: 8 > Writing 128 bytes to 5c00... > Writing 128 bytes to 5c80... > Writing 128 bytes to 5d00... > ........ > Writing 128 bytes to ff80... > Writing 128 bytes to 0000... > Writing 128 bytes to 0080... > ........ > Writing 128 bytes to 0f80... > Writing 128 bytes to 1000... > fet: FET returned error code 62 (Unknown error) > fet: failed to write to 0x1000 > ihex: error on line 1910
Hi Emilie, Looks like there might be a bug here. Would you be able to send me (off-list) the HEX file you're trying to load? Cheers, Daniel ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
