Hi!
Just checked the up/downgrade steps but I don't have a firmware image do
flash in my device and my device doesn't have a firmware to export as a
backup...
Anyone knows where I could get a fw v2 or v3 image?
Thx
FS
*"If it doesn't starts with you, it dies with you." *
Julian Casablancas
On Tue, Jul 1, 2014 at 10:55 AM, Fávero Santos <favero.san...@gmail.com>
wrote:
> Thanks for the replies! I'll try that and I'll get back to you.
>
> FS
>
>
> *"If it doesn't starts with you, it dies with you." *
> Julian Casablancas
>
>
> On Tue, Jul 1, 2014 at 10:50 AM, Mitnacht, Thomas <t-mitna...@ti.com>
> wrote:
>
>> Hello Fávero,
>> Try to follow the procedure described in the update and downgrade section.
>>
>> Thanks,
>> Thomas Mitnacht
>>
>>
>> Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising.
>> Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher.
>> Vorsitzender des Aufsichtsrates: Andreas Schwaiger
>>
>> -----Original Message-----
>> From: Fávero Santos [mailto:favero.san...@gmail.com]
>> Sent: Dienstag, 1. Juli 2014 15:40
>> To: mspgcc-users@lists.sourceforge.net
>> Subject: [Mspgcc-users] tilib: MSP430_FET_FwUpdate: MSP-FET430UIF
>> Firmware erased - Bootloader active (error = 56)
>>
>> Hello!
>>
>> I was updating my fet430uif when I accidentally disconnected my device.
>> Before it happened, it was working like a charm - no problems whatsoever,
>> I could flash and debug nicely. Now even the leds initialization sequence
>> doesn't work. I've tried to update the fet's firmware, but, sadly, no luck.
>>
>> I tried investigating what happened to my fet and called some update
>> functions:
>> a) mspdebug tilib -d /dev/ttyACM0 :
>> tilib: MSP430_FET_FwUpdate: MSP-FET430UIF Firmware erased - Bootloader
>> active (error = 56)"
>>
>> b) mspdebug tilib -d /dev/ttyACM0 --require-fw-update Uifv3Downgrader.txt:
>> ...
>> Updating firmware using Uifv3Downgrader.txt Starting firmware update
>> (this may take some time)...
>> Initializing bootloader...
>> Initializing bootloader...
>> Initializing bootloader...
>> tilib: MSP430_FET_FwUpdate: MSP-FET430UIF Firmware erased - Bootloader
>> active (error = 56)
>> tilib: device initialization failed
>>
>> c) mspdebug uif-bsl -d /dev/ttyACM0 "prog Uifv3Updater.txt"
>> Trying to open /dev/ttyACM0 at 460800 bps...
>> comport: read error: Connection timed out
>> bsl: failed to enter bootloader
>> bsl: warning: FET firmware not responding
>> comport: read error: Connection timed out
>> bsl: failed to receive reply
>> comport: read error: Connection timed out
>> bsl: failed to receive reply
>> bsl: sync failed
>> bsl: failed on command 0x38 (addr = 0x0ff0, len = 0x0010)
>> bsl: failed to read chip info
>>
>> So, yeah, everything points that the msp430f1612 in my fet is erased. My
>> question is: how to revive my fet if I don't have a firmware image?
>>
>> Some points:
>> 1) It was a V3 firmware in the good old days.
>> 2) Already tried using elprotronic flasher to update my fw but with no
>> results.
>>
>> That's it guys, hope you can give some hints on what to do. Thank you for
>> your time and effort reading my problem. Sorry for the lazy english.
>>
>> Regards
>>
>> FS
>>
>> *"If it doesn't starts with you, it dies with you." * Julian Casablancas
>>
>>
>
------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft
_______________________________________________
Mspgcc-users mailing list
Mspgcc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mspgcc-users
