Run the firmware update as root. Peter
On Thu, Jul 3, 2014 at 5:55 PM, Fávero Santos <favero.san...@gmail.com> wrote: > Hello! > > I just did the flashing process on my bricked fet. The only change is that > it initializes normally now. When I try to access tilib with it, the board > requires a fw update. When I insert the cmd, mspdebug tilib > --allow-fw-update, I get stuck when it's trying to initialize the > bootloader. Here the message: > > mspdebug tilib --allow-fw-update > MSPDebug version 0.22 - debugging tool for MSP430 MCUs > Copyright (C) 2009-2013 Daniel Beer <dlb...@gmail.com> > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > MSP430_GetNumberOfUsbIfs > MSP430_GetNameOfUsbIf > Found FET: /dev/serial/by-id/../../ttyACM0 > MSP430_Initialize: /dev/serial/by-id/../../ttyACM0 > FET firmware update is required. > Starting firmware update (this may take some time)... > Initializing bootloader... > Initializing bootloader... > Initializing bootloader... > tilib: MSP430_FET_FwUpdate: MSP-FET430UIF Firmware erased - Bootloader > active (error = 56) > tilib: device initialization failed > > As I said before, the bricked fet do its led initialization (3 red blinks, > 1 red blink sustained and then green sustained). > > Weird... Is it possible that the boostrap loader cannot find my firmware? > Ps. In linux, driver is ACM0 and firmware version is 3. > > Thanks! > > Fávero > > FS > > *"If it doesn't starts with you, it dies with you." * > Julian Casablancas > > > On Wed, Jul 2, 2014 at 8:13 PM, Chris Liechti <cliec...@gmx.net> wrote: > >> Am 02.07.2014 16:58, schrieb Fávero Santos:> 3) Last night I went to a >> friend's lab and managed to get a copy of a >> > v2firm. >> >> i suggest you use your friends JTAG interface to flash yours. >> >> if you open the MSP-FET430UIF, you'll find a connector with one row of 5 >> pins. this is the JTAG interface of the MSP430 in there and it is >> compatible with the 14 pin cable, just plug it in on the correct edge >> (connect pin 1 on 14 pin header). >> >> the USB interface must be plugged in to provide power but then you >> should be able to write the firmware with your friends JTAG box to your >> MSP-FET430UIF, just like you'd program any firmware on a board. >> >> unfortunately does the layout of the MSP-FET430UIF NOT connect the >> ROM-BSL of the contained MSP430 (at least not on previous versions of >> the board, the pins to start the BSL are not connected correctly), so if >> the firmware is broken, there is no other way than using an other JTAG >> interface to recover. >> >> chris >> >> >> ------------------------------------------------------------------------------ >> Open source business process management suite built on Java and Eclipse >> Turn processes into business applications with Bonita BPM Community Edition >> Quickly connect people, data, and systems into organized workflows >> Winner of BOSSIE, CODIE, OW2 and Gartner awards >> http://p.sf.net/sfu/Bonitasoft >> _______________________________________________ >> Mspgcc-users mailing list >> Mspgcc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/mspgcc-users >> > > ------------------------------------------------------------------------------ > Open source business process management suite built on Java and Eclipse > Turn processes into business applications with Bonita BPM Community Edition > Quickly connect people, data, and systems into organized workflows > Winner of BOSSIE, CODIE, OW2 and Gartner awards > http://p.sf.net/sfu/Bonitasoft > _______________________________________________ > Mspgcc-users mailing list > Mspgcc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mspgcc-users > ------------------------------------------------------------------------------ Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
