Operating system Windows 7 x64 NUT version 2.6.5 Windows port UPS Victron NetPro connected via serial port
When I run driver when UPS cable is connected to computer's serial port it exits with following output victronups - -DDDD -a victron Network UPS Tools -GE/IMU/Victron UPS driver 0.20 (2.6.5.-3723:3731M) 0.000000 debug level is "4" 0.000000 w32_serial_open (COM1) 0.000000 setting initial state on COM1 0.015600 0000000050 = w32_serial_open (COM1) 0.015600 Warning: no locking method is available: No error 0.015600 tcgetattr(COM1): Input/output error But... when I run the driver and few seconds later connect the cable to serial port it works correctly. So far no solution found, plz help. _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
