In message <tencent_4b1dcc2a73618d7533b96...@qq.com>, =?ISO-8859-1?B?QXJpZXM=?= writes: >Actually the Dell H330 only has one hybrid mode firmware which can be switched > between raid and HBA modes. All the distributions include Solaris and linux r >egard this kind firmware of H330 as IR mode regardless of the raid or HBA mode >. Although I always put it in HBA mode, the mr_sas or something similar is use >d. Therefore when I read the release note of r151022, I was surprised that Omn >iOS started to support H330 via mpt_sas. However the test result seems a bit d >isappointing.
The H330 looks awfully like Broadcom/LSI's 9300-8i: <URL:http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/Dell-PowerEdge-RAID-Controller-H330.pdf> <URL:https://www.broadcom.com/products/storage/host-bus-adapters/sas-9300-8i#specifications> What happens when you sas3flash the Dell HBA with the LSI SAS3008 IT firmware? Also, what's the PCI ID for the H330? John groenv...@acm.org _______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss