Thank you for replay.
Yes. AFAIK, the hardware of H330 should be as same as the LSI SAS3008.
But as it is an OEM Dell branded card with choppy firmware, sadly, it's not
supported by the sas3flash utility.
Unlike the 2008 series, I cannot find a way to crossflash it to the IT firmware
for the moment.
The PCI-id is 1000 005f which is a MegaRaid.
Maybe I should go for a proper 3008 card or a Dell HBA330 card to save some
time...
Cheers,
Aries
------------------ Original ------------------
From: "John D Groenveld";<jdg...@elvis.arl.psu.edu>;
Date: Jul 4, 2017
To: "omnios-discuss"<omnios-discuss@lists.omniti.com>;
Subject: Re: [OmniOS-discuss] Dell H330 and mpt_sas on r151022
In message <tencent_4b1dcc2a73618d7533b96...@qq.com>, =?ISO-8859-1?B?QXJpZXM=?=
writes:
>Actually the Dell H330 only has one hybrid mode firmware which can be switched
> between raid and HBA modes. All the distributions include Solaris and linux r
>egard this kind firmware of H330 as IR mode regardless of the raid or HBA mode
>. Although I always put it in HBA mode, the mr_sas or something similar is use
>d. Therefore when I read the release note of r151022, I was surprised that Omn
>iOS started to support H330 via mpt_sas. However the test result seems a bit d
>isappointing.
The H330 looks awfully like Broadcom/LSI's 9300-8i:
<URL:http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/Dell-PowerEdge-RAID-Controller-H330.pdf>
<URL:https://www.broadcom.com/products/storage/host-bus-adapters/sas-9300-8i#specifications>
What happens when you sas3flash the Dell HBA with the LSI SAS3008
IT firmware?
Also, what's the PCI ID for the H330?
John
groenv...@acm.org
_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
_______________________________________________
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
