We have an ATCA chassis with Schroff shelf manager (BMC). The chassis
has 4 blades each having an MC. I am able to rmcpping the Shelf
Manager(BMC) from any of the blades. But I am not able to rmcpping b/w
the blades. Looking into the problem I've found that on the blades no
process is running on the port 623 (which is the default port used by
rmcpping).
Is it that only the Shelf Manager can reply to rmcppings but not the MCs on the blades? In that case how is the communication b/w BMC and MCs is done?? Is it through the IPMB Bus?? i.e., does BMC and MCs on the blades never use Ethernet to communicate (Specifically MCs not the processes like openhpi apps running on blades)??
Regards,
Is it that only the Shelf Manager can reply to rmcppings but not the MCs on the blades? In that case how is the communication b/w BMC and MCs is done?? Is it through the IPMB Bus?? i.e., does BMC and MCs on the blades never use Ethernet to communicate (Specifically MCs not the processes like openhpi apps running on blades)??
Regards,
--
Raghavendra G
Software Engineer,
Clovis Solutions, Bangalore
+91 9880213025
Raghavendra G
Software Engineer,
Clovis Solutions, Bangalore
+91 9880213025
