Since RMCP is an internet protocol, unless the blades have internet connections they will be unable to respond. Some blades do, BTW. But yours apparently don't. And it not a process running on the blades, it's running on the MC.
Communiction to the MCs is done over IPMB in a ATCA chassis. -Corey Raghavendra G wrote: > Hi all, > We have an ATCA chassis with Schroff shelf manager (BMC). The chassis > has 4 blades each having an MC. I am able to rmcpping the Shelf > Manager(BMC) from any of the blades. But I am not able to rmcpping b/w > the blades. Looking into the problem I've found that on the blades no > process is running on the port 623 (which is the default port used by > rmcpping). > > Is it that only the Shelf Manager can reply to rmcppings but not the > MCs on the blades? In that case how is the communication b/w BMC and > MCs is done?? Is it through the IPMB Bus?? i.e., does BMC and MCs on > the blades never use Ethernet to communicate (Specifically MCs not the > processes like openhpi apps running on blades)?? > > Regards, > -- > > Raghavendra G > Software Engineer, > Clovis Solutions, Bangalore > +91 9880213025 > > ------------------------------------------------------- All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642 _______________________________________________ Openipmi-developer mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openipmi-developer
