On Fri, May 25, 2012 at 6:15 PM, Vaclav Peroutka <[email protected]> wrote: >> No, it means Segger J-Link supports JTAG and SWD with Segger tools >> (and IAR, etc). But OpenOCD does not support SWD on J-Link. >> > > Hi, I did not write that OpenOCD did it. But if JLink already has SWD > support, OpenOCD _can_ (in the future) support this transport with JLink, > as well.
Yes in therory. Somebody needs to take on the work though. And remember libswd integration has not been done for OpenOCD and that may take quite some time to be done. And the current SWD support work mainly concentrates on certain device like KT-Link (libswd from Tomek) and Versaloon (Simon's work). > And my question was, if there were any plans to extend this support. > Or JLink SWD commands are not publicly available from Segger ? The whole J-Link documentation (include JTAG) is not complete from Segger's documentation, that is not a problem though as reverse-engineering can be done. -- Xiaofan ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
