On May 25, 2012, at 13:15 , Vaclav Peroutka wrote: > ... And my question was, if there were any plans to extend this support.
if you are not telling to anyone, and without commiting yet to the task, I confess that I planned to spend some time to estimate the work needed to add swd support to the jlink driver. unfortunately I don't think this will be possible before 1-2 weeks. my goal is to add support for swo tracing, similar to the one implemented in the Segger GDB Server (a separate socket to telnet into, where the stream of tracing bytes is echoed), and to integrate it in the second edition of my other project, the GNU ARM Eclipse Plug-in. > Or JLink SWD commands are not publicly available from Segger ? the article 1.2 of the Segger manual dedicated to the USB protocol states: "The purpose of this document is to allow developers of open source software such as OpenOCD to write software which uses J-Link as debug interface." so, even if the manual is incomplete, I think that Segger will not refuse us any further information related to the protocol. current experience with them was good, they replied in the same day, and I have nothing to complain about. I have no problem to act in close liason with Segger, if needed. regards, Liviu ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
