On Tue, May 29, 2012 at 6:36 PM, Xiaofan Chen <[email protected]> wrote:
> My colleague just bought a few Flasher ARM (J-Link V8 compatible)
> and it works withe your patch as well.
>
> The latest release of Segger DLL comes with the following
> FW for the Flasher ARM.
> J-Link ARM / Flasher ARM V3 compiled Apr 20 2012 17:36:24
>
Interestingly the Flasher ARM works with vanilla git version
of OpenOCD as well. I did unplug and plug the Flasher ARM
this time.
mymacmini:stm32 xiaofanc$ openocd -f openocd_jlink.cfg
Open On-Chip Debugger 0.6.0-dev-00595-g445a54a (2012-05-25-20:38)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Warn : Adapter driver 'jlink' did not declare which transports it
allows; assuming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
cortex_m3 reset_config sysresetreq
libusbx: warning [darwin_cache_device_descriptor] could not retrieve
device descriptor 05ac:8281: device not responding. skipping device
Info : J-Link initialization started / target CPU reset initiated
Info : J-Link ARM / Flasher ARM V3 compiled Apr 20 2012 17:36:24
Info : J-Link caps 0xbfff7bbf
Info : J-Link hw version 2030000
Info : J-Link hw type Flasher
Info : J-Link max mem block 32744
Info : J-Link configuration
Info : USB-Address: 0x0
Info : Kickstart power on JTAG-pin 19: 0xffffffff
Info : Vref = 3.293 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 0 TRST = 0
Info : J-Link JTAG Interface ready
Info : clock speed 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020,
part: 0x6410, ver: 0x1)
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints
1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020,
part: 0x6410, ver: 0x1)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0800272c msp: 0x20000810
8000 kHz
dumped 131072 bytes in 0.982017s (130.344 KiB/s)
verified 131072 bytes in 0.277907s (460.586 KiB/s)
Info : device id = 0x20036410
Info : flash size = 128kbytes
stm32x mass erase complete
wrote 131072 bytes from file dump.bin in 3.597987s (35.575 KiB/s)
verified 131072 bytes in 0.282505s (453.089 KiB/s)
20480 bytes written at address 0x20000000
downloaded 20480 bytes in 0.129214s (154.782 KiB/s)
1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020,
part: 0x6410, ver: 0x1)
shutdown command invoked
--
Xiaofan
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
