On Mon, May 28, 2012 at 6:46 PM, Xiaofan Chen <[email protected]> wrote: > On Mon, May 28, 2012 at 4:55 PM, Alexander Osipenko <[email protected]> wrote: >> Hi, >> >> i have submit latest patches. >> The problem with pre-V6 should be fixed. > > Thanks. Yes the latest patch set is good. I give it a +1 now. On > the other hand, maybe it is good to get some confirmation from > Spen as well. > > I will also try to borrow a V6 to further test the new patch set. > > Take note I also apply your patch here. I think that one should be > merged to the mainline git now. > http://openocd.zylin.com/#/c/670/
BTW, I also tested V7 and V8 J-Link and both work fine. I need to return the V8 J-Link to my colleague so that I can not test it again until the weekend. But I will get a V6 for testing. > mymacmini:stm32 xiaofanc$ ~/binj2/bin/openocd -f openocd_jlink.cfg > Open On-Chip Debugger 0.6.0-dev-00597-gb4ce520-dirty (2012-05-28-18:34) > Licensed under GNU GPL v2 > For bug reports, read > http://openocd.sourceforge.net/doc/doxygen/bugs.html > Info : only one transport option; autoselect 'jtag' > 1000 kHz > adapter_nsrst_delay: 100 > jtag_ntrst_delay: 100 > cortex_m3 reset_config sysresetreq > [timestamp] [threadID] facility level [function call] <message> > -------------------------------------------------------------------------------- > [ 0.000000] [00000407] libusbx: warning > [darwin_cache_device_descriptor] could not retrieve device descriptor > 05ac:8281: device not responding. skipping device > [ 0.203557] [00000407] libusbx: warning [libusb_get_config_descriptor] > descriptor data still left > [ 0.265642] [00000407] libusbx: warning [libusb_get_config_descriptor] > descriptor data still left > Info : J-Link initialization started / target CPU reset initiated > Info : J-Link compiled Feb 20 2006 18:20:20 -- Update -- > Info : J-Link caps 0x3 > Info : J-Link hw version 30000 > Info : J-Link hw type J-Link > Info : Vref = 3.286 TCK = 1 TDI = 1 TDO = 1 TMS = 1 SRST = 0 TRST = 255 > Info : J-Link JTAG Interface ready > Info : clock speed 1000 kHz > Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, > part: 0x6410, ver: 0x1) > Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints > 1000 kHz > Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, > part: 0x6410, ver: 0x1) > target state: halted > target halted due to debug-request, current mode: Thread > xPSR: 0x01000000 pc: 0x0800272c msp: 0x20000810 > 8000 kHz > dumped 131072 bytes in 1.045539s (122.425 KiB/s) > verified 131072 bytes in 0.286362s (446.987 KiB/s) > Info : device id = 0x20036410 > Info : flash size = 128kbytes > stm32x mass erase complete > wrote 131072 bytes from file dump.bin in 3.618656s (35.372 KiB/s) > verified 131072 bytes in 0.292000s (438.356 KiB/s) > 20480 bytes written at address 0x20000000 > downloaded 20480 bytes in 0.149020s (134.210 KiB/s) > 1000 kHz > Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: > 0x23b, part: 0xba00, ver: 0x3) > Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, > part: 0x6410, ver: 0x1) > shutdown command invoked > mymacmini:stm32 xiaofanc$ ~/binj2/bin/openocd -f openocd_jlink.cfg Open On-Chip Debugger 0.6.0-dev-00597-gb4ce520-dirty (2012-05-28-18:34) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' 1000 kHz adapter_nsrst_delay: 100 jtag_ntrst_delay: 100 cortex_m3 reset_config sysresetreq [timestamp] [threadID] facility level [function call] <message> -------------------------------------------------------------------------------- [ 0.000000] [00000407] libusbx: warning [darwin_cache_device_descriptor] could not retrieve device descriptor 05ac:8281: device not responding. skipping device Info : J-Link initialization started / target CPU reset initiated Info : J-Link ARM V7 compiled Feb 15 2011 11:03:33 Info : J-Link caps 0xb9ff7bbf Info : J-Link hw version 70000 Info : J-Link hw type J-Link Info : J-Link max mem block 9000 Info : J-Link configuration Info : USB-Address: 0x0 Info : Kickstart power on JTAG-pin 19: 0xffffffff Info : Vref = 3.274 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 0 TRST = 0 Info : J-Link JTAG Interface ready Info : clock speed 1000 kHz Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints 1000 kHz Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x0800272c msp: 0x20000810 8000 kHz dumped 131072 bytes in 1.248115s (102.555 KiB/s) verified 131072 bytes in 0.295456s (433.229 KiB/s) Info : device id = 0x20036410 Info : flash size = 128kbytes stm32x mass erase complete wrote 131072 bytes from file dump.bin in 3.631807s (35.244 KiB/s) verified 131072 bytes in 0.301644s (424.341 KiB/s) 20480 bytes written at address 0x20000000 downloaded 20480 bytes in 0.166396s (120.195 KiB/s) 1000 kHz Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) shutdown command invoked mymacmini:stm32 xiaofanc$ ~/binj2/bin/openocd -f openocd_jlink.cfg Open On-Chip Debugger 0.6.0-dev-00597-gb4ce520-dirty (2012-05-28-18:34) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' 1000 kHz adapter_nsrst_delay: 100 jtag_ntrst_delay: 100 cortex_m3 reset_config sysresetreq [timestamp] [threadID] facility level [function call] <message> -------------------------------------------------------------------------------- [ 0.000000] [00000407] libusbx: warning [darwin_cache_device_descriptor] could not retrieve device descriptor 05ac:8281: device not responding. skipping device Info : J-Link initialization started / target CPU reset initiated Info : J-Link ARM V8 compiled May 24 2012 11:19:27 Info : J-Link caps 0xb9ff7bbf Info : J-Link hw version 80000 Info : J-Link hw type J-Link Info : J-Link max mem block 9328 Info : J-Link configuration Info : USB-Address: 0x0 Info : Kickstart power on JTAG-pin 19: 0xffffff01 Info : Vref = 3.300 TCK = 1 TDI = 1 TDO = 1 TMS = 1 SRST = 0 TRST = 1 Info : J-Link JTAG Interface ready Info : clock speed 1000 kHz Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints 1000 kHz Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x0800272c msp: 0x20000810 8000 kHz dumped 131072 bytes in 1.010399s (126.683 KiB/s) verified 131072 bytes in 0.293500s (436.116 KiB/s) Info : device id = 0x20036410 Info : flash size = 128kbytes stm32x mass erase complete wrote 131072 bytes from file dump.bin in 3.622165s (35.338 KiB/s) verified 131072 bytes in 0.301185s (424.988 KiB/s) 20480 bytes written at address 0x20000000 downloaded 20480 bytes in 0.139551s (143.317 KiB/s) 1000 kHz Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG tap: stm32f1x.bs tap/device found: 0x16410041 (mfg: 0x020, part: 0x6410, ver: 0x1) shutdown command invoked -- Xiaofan ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
