Hi Milton, you need to run the newer 64Bit Kernel. This one is included since base 2.1-22. Please go to the clients hardwaretype and set the kernel to 64 bit.
Background: The 64Bit kernel was taken from jessie and is the more recent one. Newer kernel, newer modules - better support of new hardware. Good luck! Jörn Am 03.05.2017 um 01:39 schrieb Milton Regalado: > Hi, > > I got some new Intel NUC to use them within our Pales OTC, but I'm > having problems with the display outputs, one HDMI and one VGA. > > When I execute the command XRANDR, either having the NUC connected > through any of the ports, HDMI or VGA, I'm getting the following output: > > xrandr: Failed to get size of gamma for output default > > Screen 0: minimum 640 x 480, current 1920 x 1200, maximum 1920 x 1200 > > default connected primary 1920x1200+0+0 0mm x 0mm > > 1920x1080 0.0 > > 1600x1200 0.0 > > 1280x1024 0.0 > > 800x600 0.0 > > 640x480 0.0 > > 1920x1200 0.0* > > > It can't recognize the HDMI nor the VGA port, and consequently, I can't > attach any Display Device through the OTC manager to these Thin Clients. > > Have you had a similar case before? > > It looks like the OS can't find the right display driver for the Intel > HD Graphics. > > How I can fix this problem? > > Thanks & Best Regards. > > -- > > Milton Regalado. > > > > Dieser Nachrichteninhalt wird auf Anfrage komplett heruntergeladen. > > > > Dieser Nachrichteninhalt wird auf Anfrage komplett heruntergeladen. > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user