2012-04-03 20:11 keltezéssel, Paul Alfille írta:
So you've already done a lot of debugging -- the fuse system works,
and the hardware works on another system.
Thus the problem is with serial port handling (hardware or kernel or
maybe timing).
digitemp http://www.digitemp.com/ has support for the DS9097E passive
adapter and would be another test of the hardware.
It shouldn't be a polarity issue, but it could be a voltage problem on
the embedded board. The passive adapter steals power from the serial pins.
You mean it steals power for the adapter, or the sensor own? (I think
for the sensor, cause the adapter has only passive parts)
The sensor works in parasite mode. May the problem resolved by directly
powering the sensor?
Paul Alfille
On Tue, Apr 3, 2012 at 1:27 PM, Kassai Istvan <k...@zhnet.hu
<mailto:k...@zhnet.hu>> wrote:
There are two files under the owfs mountpoint named "shorts". One
in the
./bus.0/interface/statistics/ and one in the
./uncached/bus.0/interface/statistics/
Both of them contains "0"
------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
