On 11/19/06, Peter Baitz <[EMAIL PROTECTED]> wrote:
Are you using the stock pwc.ko or did you recompile
the Saillard.org pwc.ko latest snapshot? If you
recompiled, did you do a 'make install', or copy the
new pwc.ko to the peoper kernel modules directory, and
delete the stock pwc.ko file? Notice the 'make
install' will put the new pwc.ko into a different
subdirectory than the stock pwc.ko module file.
Also note that when you compile the pwc module it will
be much bigger, and I personally don't recommend doing
any stripping down of it if you want full
functionality. The compiled version is 600k-800k or
so while the stock version with fc6 is around 90k.
Example I needed it to support fully my SPC900NC
webcam (ToUcam Pro III) and the stock driver won't
support the LED functions correctly, but recompiled
Saillard snapshot will.
Peter
--- Lonni J Friedman <[EMAIL PROTECTED]> wrote:
> Anyone else running into problems with the pwc
> driver in
> 2.6.18-1.2849.fc6 ? It worked fine in
> 2.6.18-1.2798.fc6. but after
> rebooting into the newer kernel, all I get is green:
> http://netllama.linux-sxs.org/home.jpg
>
> In dmesg, I'm seeing:
> pwc: Failed to set video mode [EMAIL PROTECTED] fps; return
> code = -110
> pwc: Failed to set video mode [EMAIL PROTECTED] fps; return
> code = -110
>
Sorry, I meant that I'm using the pwc that ships with 2.6.18 (from
FC6). That version advertises itself to be 10.0.12.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman [EMAIL PROTECTED]
LlamaLand http://netllama.linux-sxs.org
_______________________________________________
pwc mailing list
[email protected]
http://lists.saillard.org/mailman/listinfo/pwc
