Hi, I use `--enable-racket=` because that I found that without it I can't build Racket CS: I ran ``` ./configure --enable-cs --enable-bc --enable-csdefault make make install``` After that only racketbc is built and installed, then I ran `make cs` to built CS explicitly, and error occurs: ...mkdir -p ChezSchemeif [ "./raw_racketcs" != "./raw_racketcs" ] ; \ then make scheme-via-rktboot BOOTFILE_RACKET="./raw_racketcs" ; \ else make scheme-via-pb ; fimake[4]: Entering directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'/bin/sh ./check_boot.sh ta6le "./../../ChezScheme" ChezSchemeif [ -f boot_pending ] ; then make pb-bootquick ; fimake[5]: Entering directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'make config-scheme MACH=pb CONFIG_SCHEME_MODE=--pbmake[6]: Entering directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'cd ChezScheme && ".././../../ChezScheme"/configure --pb --machine=ta6le --disable-x11 --disable-curses --disable-auto-flags --enable-warning-flags CC="gcc" CFLAGS="-g -O2 -Wall -DELF_FIND_BOOT_SECTION -pthread" LDFLAGS="-pthread" LIBS="-ldl -lm -lrt" AR="ar" ARFLAGS="rc" RANLIB="ranlib" WINDRES="windres"No suitable machine type found in "boot". Available machine types:
Since no directory in "boot" exists for pb, you can tryusing Racket v7.1 or later with racket rktboot/main.rkt --machine pbto create the boot files, and then try .././../../ChezScheme/configure again.Makefile:164: recipe for target 'config-scheme' failedmake[6]: *** [config-scheme] Error 1make[6]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'Makefile:147: recipe for target 'pb-bootquick' failedmake[5]: *** [pb-bootquick] Error 2make[5]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'Makefile:142: recipe for target 'scheme-via-pb' failedmake[4]: *** [scheme-via-pb] Error 2make[4]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'Makefile:126: recipe for target 'scheme' failedmake[3]: *** [scheme] Error 2make[3]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'Makefile:81: recipe for target 'cs' failedmake[2]: *** [cs] Error 2make[2]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/cs/c'Makefile:76: recipe for target 'racketcs' failedmake[1]: *** [racketcs] Error 2make[1]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src'Makefile:83: recipe for target 'cs' failedmake: *** [cs] Error 2 Greetings. Killian Zhuo (KDr2, https://kdr2.com) On Saturday, February 6, 2021, 08:00:54 AM GMT+8, Matthew Flatt <mfl...@cs.utah.edu> wrote: Maybe I missed some context, but why are you using `--enable-racket`? Normally, with a Git checkout, you'd just use `make cs` and/or `make bc` in the root directory. Using `--enable-racket` is mostly for cross compilation. At Fri, 5 Feb 2021 17:57:31 -0600, Shu-Hung You wrote: > The snapshot build here may help: https://snapshot.racket-lang.org/ > > The HEAD version could add new internal primitives from time to time. > > Shu-Hung > > On Fri, Feb 5, 2021 at 5:52 PM 'Killian Zhuo (KDr2)' via Racket Users > <racket-users@googlegroups.com> wrote: > > > > Thank you, does that mean I need a v8.0.0.5 to compile a v8.0.0.5? > > > > I thought v7.9 is new enough... > > > > Greetings. > > > > Killian Zhuo (KDr2, https://kdr2.com) > > > > > > > > On Saturday, February 6, 2021, 07:47:41 AM GMT+8, Sam Tobin-Hochstadt > <sa...@cs.indiana.edu> wrote: > > > > > > This means that you're building with a previous version of Racket that is > > too > old (which might be quite recent but is nonetheless too old to use in place > of > bootstrapping). > > > > Sam > > > > On Fri, Feb 5, 2021, 6:44 PM 'Killian Zhuo (KDr2)' via Racket Users > <racket-users@googlegroups.com> wrote: > > > > Here is my configure command: > > > > ./configure --enable-cs --enable-bc --enable-csdefault > --enable-racket=$HOME/programs/racket/bin/racket > > > > $HOME/programs/racket/bin/racket is a prebuilt Racket whose version is 7.9. > > > > Then I ran `make cs` and `make install-cs`, all worked well. > > > > Then `make bc` it also worked well, but when I ran `make install-bc`, some > errors occured: > > > > make[4]: Entering directory '/data/zhuoql/Work/hall/racket/racket/src/bc' > > if [ "" = "" ]; then \ > > echo "/data/zhuoql/Work/hall/racket/racket/lib"; \ > > fi > > /data/zhuoql/Work/hall/racket/racket/lib > > make[4]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/bc' > > make[3]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src' > > make[2]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src' > > cd bc && make install-setup-3m SELF_ROOT_CONFIG_FLAG="-Z" > PLT_SETUP_OPTIONS="" SETUP_MACHINE_FLAGS="" > > make[2]: Entering directory '/data/zhuoql/Work/hall/racket/racket/src/bc' > > /data/zhuoql/programs/racket/bin/racket -X > "/data/zhuoql/Work/hall/racket/racket/collects" -G > "/data/zhuoql/Work/hall/racket/racket/etc" -Z ../../../../build/config > --no-user-path -N "raco" -l- setup --no-user > > raco setup: bootstrapping from source... > > read-compiled-linklet: version mismatch expected: "7.9" found: "8.0.0.5" > > > in: > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/compiled/cm-minim > al_rkt.zo > > /data/zhuoql/Work/hall/racket/racket/collects/racket/fixnum.rkt:12:9: > provide: provided identifier is not defined or required > > at: fx+/wraparound > > in: (#%provide (expand (provide-trampoline fx->fl fl->fx fxabs fx+ fx- fx* > fx+/wraparound fx-/wraparound fx*/wraparound fxquotient fxremainder fxmodulo > fxand fxior fxxor fxnot fxrshift fxlshift fxlshift/wraparound fx>= fx> fx= > fx< > fx<= fxmin fxmax fixnum-fo... > > location...: > > /data/zhuoql/Work/hall/racket/racket/collects/racket/fixnum.rkt:12:9 > > context...: > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:61 > 0:0: compile-zo* > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:40 > 9:15 > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:37 > 4:0: maybe-compile-zo > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:20 > 8:0: compile-root > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:14 > 4:4: compilation-manager-load-handler > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:61 > 0:0: compile-zo* > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:40 > 9:15 > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:37 > 4:0: maybe-compile-zo > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:20 > 8:0: compile-root > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:14 > 4:4: compilation-manager-load-handler > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:61 > 0:0: compile-zo* > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:40 > 9:15 > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:37 > 4:0: maybe-compile-zo > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:20 > 8:0: compile-root > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:14 > 4:4: compilation-manager-load-handler > > > /data/zhuoql/Work/hall/racket/racket/collects/compiler/private/cm-minimal.rkt:61 > 0:0: compile-zo* > > ... > > Makefile:469: recipe for target 'install-setup-3m' failed > > make[2]: *** [install-setup-3m] Error 1 > > make[2]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src/bc' > > Makefile:179: recipe for target 'install-3m' failed > > make[1]: *** [install-3m] Error 2 > > make[1]: Leaving directory '/data/zhuoql/Work/hall/racket/racket/src' > > Makefile:114: recipe for target 'install-bc' failed > > make: *** [install-bc] Error 2 > > > > > > > > I worked on the head of the master branch, anyone knows how to fix this? > Thanks. > > > > Greetings. > > > > Killian Zhuo (KDr2, https://kdr2.com) > > > > -- > > You received this message because you are subscribed to the Google Groups > "Racket Users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to racket-users+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/racket-users/252652007.2153435.1612568669639%4 > 0mail.yahoo.com. > > > > -- > > You received this message because you are subscribed to the Google Groups > "Racket Users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to racket-users+unsubscr...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/racket-users/120349817.2158523.1612569152021%4 > 0mail.yahoo.com. > > -- > You received this message because you are subscribed to the Google Groups > "Racket Users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email > to racket-users+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/racket-users/CAMTzy%2BbzwyqxPqoyWwsaYM0shbmWxk > 03D4M-nbP1xom8730Wqg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Racket Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to racket-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/racket-users/20210205170048.2bc%40sirmail.smtps.cs.utah.edu. -- You received this message because you are subscribed to the Google Groups "Racket Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to racket-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/racket-users/123405018.2182086.1612573434470%40mail.yahoo.com.
