This is a problem that has plaqued me now for months...and I can't seem to find out what the problem is. I have a Micro Computer Concepts converted GE Mastr Exec II UHF repeater the built in RC100 controller. I also have a TM-G707 as a remote base. The problem I have is that sometimes the "repeated" audio disappears, but the audio will still pass thru the remote base port. This may go on for just hours or days....but the "repeated" audio will come back. I can go and cycle the power on and off...and it fixes it, for awhile.
I have cleaned connections, I have changed out the exciter, I have changed out the op. amp chip on the controller. I have NOT changed out C4 nor R9, which is in that line (with the except it also ties into the remote base tx line...that is not having problems). I have also not changed out the op amp on the drop in board that MCC put in. It seems to control the custon front volume and squelch panel...but I am not sure if that would be the problem. I have a 800mhz trunked antenna that got put REAL close to the repeater antenna. If that causes it to blank out, I don't know (also have a LARGE DCI intermod filter)...but what componet would be going bad? Ideas? Thanks, Robert ________________________________________________________________ Juno Platinum $9.95. Juno SpeedBand $14.95. Sign up for Juno Today at http://www.juno.com! Look for special offers at Best Buy stores. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
