At 8/3/2009 14:42, you wrote: >Or RG-9/U. > >Norm N5NPO I think most RG-9/U has copper braid, & is unsuitable for use in any duplexed portion of a repeater system (from the duplexer T to the antenna). Should be OK for RX & TX interconnects though.
Bob NO6B >----- Original Message ----- >From: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> >To: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> >Sent: Mon Aug 03 16:20:42 2009 >Subject: Re: [Repeater-Builder] Possible desense issue, any thoughts > > > >At 06:34 AM 08/03/09, you wrote: > > >Hey Jed, RG-213 is single shielded. You need to install double > >shielded cables. Suggest using hardline, RG-214 or RG-142 for > >jumpers. That should cure the problem. > > > >Paul Maggiore AA3VI > > > >V.P. Maggiore Electronic Lab (HiPro) > >Or RG400. > >Mike WA6ILQ > > > > > > >------------------------------------ > > > >Yahoo! Groups Links > > >