Hi Again- I just heard from St Bernard Software and they say that OFM no
longer has this trouble with Services for Macintosh in Windows 2000.
-- 
Ben Eastwood
IT Manager
wilweb.com
[EMAIL PROTECTED]


> From: Ben Eastwood <[EMAIL PROTECTED]>
> Reply-To: "retro-talk" <[EMAIL PROTECTED]>
> Date: Wed, 07 Mar 2001 14:41:46 -0800
> To: retro-talk <[EMAIL PROTECTED]>
> Subject: Re: ARCserve vs Retrospect Server Backup
> 
> David-
> Are you also using Open File Manager, and if so does it work OK in Win2k
> with Services for Mac? ( I know this is not really a retrospect issue, but
> not totally offtopic..)
> -- 
> Ben Eastwood
> IT Manager
> wilweb.com
> [EMAIL PROTECTED]
> 
> 
>> From: "Kraut, David" <[EMAIL PROTECTED]>
>> Reply-To: "retro-talk" <[EMAIL PROTECTED]>
>> Date: Wed, 7 Mar 2001 17:11:38 -0500
>> To: 'retro-talk' <[EMAIL PROTECTED]>
>> Subject: RE: ARCserve vs Retrospect Server Backup
>> 
>> I use it to back up a mix of (20) NT4 and Win2000 Servers.  The retrospect
>> program is running on a 2000 Server and works fine.  I've also used ArcServe
>> in the past and wild horses couldn't drag me back to that nightmare of a
>> product!!  :)
>> 
>> 
>> 
>> 
>> 
>> David Kraut
>> 
>> 
>> -----Original Message-----
>> From:  [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
>> Sent: Wednesday, March 07, 2001 8:53 AM
>> To: retro-talk
>> Subject: ARCserve vs Retrospect Server Backup
>> 
>> 
>> I've been using ARCserve for many years to backup my NT 4.0 Server and
>> NT Workstations and long time ago to backup a Novell server.  For the
>> Mac side of things though I've always preferred and used Retrospect.  I
>> prefer Retrospect because it's much easier to install, use and maintain
>> than ARCserve.  Both products have been very reliable though I'd have to
>> say that Retrospect has proved to be a little more reliable than ARCserve.
>> 
>> Now I'm finding myself needing to upgrade ARCserve to the new ARCserve
>> 2000.  However, I'd really rather drop ARCserve and switch to Retrospect
>> Server Backup to perform the NT 4.0 Server (and eventually Windows 200
>> Server) and NT Workstation backups.  Comparing the the two product's
>> features and supported drives looks to be essentially the same.
>> 
>> Anyone out there with experience using Retrospect Server Backup on a
>> Windows NT 4.0 Server?  I'd love to get some feedback about it.
>> 
>> Thanks!!
>> 
>> -- 
>> Tom Roth  *  [EMAIL PROTECTED]  *  tel 336.716.4493
>> Wake Forest University School of Medicine
>> Dept of Biomedical Communications
>> Medical Center Blvd  *  Winston-Salem, NC 27157-1011
>> http://www.wfubmc.edu/biomed/
>> 
>> 
>> --
>> ----------------------------------------------------------
>> To subscribe:    [EMAIL PROTECTED]
>> To unsubscribe:  [EMAIL PROTECTED]
>> Archives:        <http://list.working-dogs.com/lists/retro-talk/>
>> Search:  <http://www.mail-archive.com/retro-talk%40latchkey.com/>
>> 
>> For urgent issues, please contact Dantz technical support directly at
>> [EMAIL PROTECTED] or 925.253.3050.
>> 
>> 
>> --
>> ----------------------------------------------------------
>> To subscribe:    [EMAIL PROTECTED]
>> To unsubscribe:  [EMAIL PROTECTED]
>> Archives:        <http://list.working-dogs.com/lists/retro-talk/>
>> Search:  <http://www.mail-archive.com/retro-talk%40latchkey.com/>
>> 
>> For urgent issues, please contact Dantz technical support directly at
>> [EMAIL PROTECTED] or 925.253.3050.
> 
> 
> 
> --
> ----------------------------------------------------------
> To subscribe:    [EMAIL PROTECTED]
> To unsubscribe:  [EMAIL PROTECTED]
> Archives:        <http://list.working-dogs.com/lists/retro-talk/>
> Search:  <http://www.mail-archive.com/retro-talk%40latchkey.com/>
> 
> For urgent issues, please contact Dantz technical support directly at
> [EMAIL PROTECTED] or 925.253.3050.



--
----------------------------------------------------------
To subscribe:    [EMAIL PROTECTED]
To unsubscribe:  [EMAIL PROTECTED]
Archives:        <http://list.working-dogs.com/lists/retro-talk/>
Search:  <http://www.mail-archive.com/retro-talk%40latchkey.com/>

For urgent issues, please contact Dantz technical support directly at
[EMAIL PROTECTED] or 925.253.3050.

Reply via email to