All:
I just got some of my Lubuntu 12.04 systems upgraded to 12.10, and as
part of that testing, tested Rosegarden. The version of Rosegarden that
comes with Lubuntu 12.10 is Rosegarden 12.04.
The first test I ran was to play one of my demo-pieces, and it seemed
the piece was poorly balanced (the relative volume of the different
instruments was poorly adjusted).
On further investigation, I found that the settings of the knob-controls
at the bottom of the Instrument Parameters pane, were different from
what was loaded from the file (and worked properly in the earlier
version).
Apparently, the "Pan" controls were all set to center (64?), and the
"Volume" controls were all set to 100, which is different from what was
saved in the ".rg" file (and worked properly in the prior release).
I do have the configuration parameter set to send the control values at
the beginning of playback, but that was also the case with the earlier
version, and the proper volume and pan values were used in playing the
sequence.
I found that (using Rosegarden 12.04) if I changed the most-wrong volume
knob to what it was supposed to be, Rosegarden did not notice that the
sequence data had been changed. But if I saved it, and re-loaded it, it
did get the proper initial volume setting.
It was disappointing that all of the "Pan" settings got reset to 64,
since I had spent time getting the instrument-placement just right, and
now all of that work gets discarded by the new version.
I have a recent development version of Rosegarden, and checked if that
version has the same problem, and unfortunately, it does. It also loses
the initial volume and pan settings from what is loaded from the ".rg"
file.
--
Sincerely,
Aere
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Rosegarden-devel mailing list
[email protected] - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-devel
