I am sorry that I know this is not the masquerade topic. However,
I need a help for how Linux accepts a modem dial-in, and issue IP
to the dialer, and makes dial-in to ppp network...?
This is all covered in the PPP-HOWTO.
--DAvid
Hey Charles,
# /etc/ppp/options.ppp0
modem
crtscts
38400
#defaultroute
asyncmap 0
lock
192.168.1.14:192.168.1.16
proxyarp
passive
Unless you are going to have a remote subnet behind that
PPP connection, you don't need the proxyarp line.
Sometimes it works, sometimes it doesn't.
What does
[EMAIL PROTECTED] said:
} The problem happens when you double-click on the Quake2 entry in the
} left-hand window to "update the servers". The first or second time,
} you will get a good list of servers and decently low ping times. If
} you do this a few more times, all of the sudden, all the
Lots of updates especially security things for Samba.
85 users on the list and counting!
==
01/13/99Added the "logit" script to aid in real-time troubleshooting.
*Sent [Section 9]
Update*
Added a note to move the loading of SSHd higher up in the
Yes, if i fire up an ftp session on one of the clients the "Used By"
field increments.
I have experimented and found out that only passive ftp sessions work.
From a linux box on the lan an ftp session must be switched to "passive"
before I "NLIST" a directory.
Perhaps this is the way it's
"David A. Ranch" schrieb:
Linux 2.0.36 w/ ipportfw patch
ftp, quake, and raudio MASQ modules loaded
UDP ports 2000-2020 IPPORTFWed
The problem happens when you double-click on the Quake2 entry
in the left-hand window to "update the servers".
On Thu, 14 Jan 1999, Dan Kegel wrote:
Date: Thu, 14 Jan 1999 07:04:44 -0800
From: Dan Kegel [EMAIL PROTECTED]
To: "David A. Ranch" [EMAIL PROTECTED], [EMAIL PROTECTED],
[EMAIL PROTECTED]
Subject: Re: [masq] [masq-dev] A possible bug in the ip_masq_quake code?
"David A. Ranch"
Hello everyone... I'm looking for some help on Setting up IP MASQ on
RedHat 4.2, Kernel 2.0.30 . I've previously got IP MASQ configured and
working on RedHat 4.2, but it's been 8months or so, and at the time it
took me forever to finally get it working. Well I've ran into the same
problem as
Hi all !.
Can some one, please, let me know how to configure the masq,
to use ICQ and NetMeeting on the workstations ?.
Thank you very much,
Jorge.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands,
I have experimented and found out that only passive ftp sessions work.
From a linux box on the lan an ftp session must be switched to "passive"
before I "NLIST" a directory.
Perhaps this is the way it's supposed to work?
No, active FTPs work for most people as long as they are FTPing to
a
snip
The solution? Use smaller udp timeouts.
# ipfwadm -M -s 0 0 60
will leave the tcp and tcpfin timeouts at their default, and will set the
udp timeouts to 1 minute. I really don't see a reason why they can't be
set even lower or why udp has a timeout in the first place, since udp is
packet
Can some one, please, let me know how to configure the masq,
to use ICQ and NetMeeting on the workstations ?.
See http://doncaster.on.ca/~lnevo/masq/ for details
Tim Fletcher .~.
/V\ L I N U X
[EMAIL PROTECTED]
Hello all.. I am new to this list and this issue may have been already
dealt with. If so, please feel free to reply to me personally to avoid
useless traffic to the rest of the list.
We have a linux box using the 2.0.35 kernel's msaq. When behind the masq,
we observed it not possible (with the
Doug Clements [EMAIL PROTECTED] wrote:
Any particular place I should look if I say, wanted to act like I was
cool and start coding this? Maybe some kernel programming stuff? I'm
not sure exactly what I'm getting into here, but maybe it's not so
hard.
The main reason you're not having much
Hi Tim, thanks for your answer.
Can some one, please, let me know how to configure the masq,
to use ICQ and NetMeeting on the workstations ?.
See http://doncaster.on.ca/~lnevo/masq/ for details
Tim Fletcher .~.
I went there, did what described:
ipautofw -A -r tcp
Anyone that is a programmer game to attempt a battle.net masq module.
Looks like Blizzard finally got smart and started allow multi connects from
a single ip. They still only allow one connect per key, but this way multi
machines behind a masq machine can finally get to diablo and
Whenever I try to telnet or ftp to a box behind my gateway I end up with the
following error messages:
Jan 14 02:06:26 takamine in.telnetd[1550]: connect from unknown
Jan 14 02:06:32 takamine in.telnetd[1551]: warning: can't get client address:
Connection reset by peer
Jan 14 02:06:32 takamine
I went there, did what described:
ipautofw -A -r tcp 2000 3000 -h 192.168.0.17
And I´ve got this:
setsockopt: Protocol not available
Any sugestion, please ?
http://www.ox.compsoc.org.uk/~steve/portforwarding.html
Tim Fletcher .~.
18 matches
Mail list logo