Re: BIND Upgrade
We are working intensively at Red Hat to finally fix that version. A huge thanks goes to ISC, which kindy provided complex backport into 9.11 version, which they do not support for a long time. It was discovered those changes require also changes to bind-dyndb-ldap used in freeipa and also may break dhcp without rebuilds. Because we use bind rebuild also for dhcp, which were fixed already. It should be fixed soon finally. We are sorry this is taking us so long, but those changes are not trivial to make. Especially without additional regressions. If you can use bind9.16 package instead, that would be fixed earlier. Regards, Petr On 15. 02. 24 13:53, Semra Türkkal Nazlımoğlu wrote: Hello, Our bind version seems below. How can we upgrade bind version? And if we upgrade bind version, is there any problem? [root@ns2 ~]# named -v BIND 9.11.36-RedHat-9.11.36-11.el8_9 (Extended Support Version) Thanks Semra -- Petr Menšík Software Engineer, RHEL Red Hat,http://www.redhat.com/ PGP: DFCF908DB7C87E8E529925BC4931CA5B6C9FC5CB -- Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND Upgrade
Hi there, On Fri, 16 Feb 2024, Semra T?rkkal Nazl?mo?lu wrote: Our bind version seems below. How can we upgrade bind version? And if we upgrade bind version, is there any problem? Recently I upgraded from 9.11.26 (not 9.11.36) to 9.18.24 using the source from the ISC Website. It's a very small setup here. The only thing I needed to do to the configuration was remove a single obsolete option (dnssec-enable) from named.conf. -- 73, Ged. -- Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND Upgrade
Hi, You don't need to use the RHEL version of BIND. ISC supplies packages that you can add as described here: https://kb.isc.org/docs/isc-packages-for-bind-9 Thank you, Darren Ankney On Thu, Feb 15, 2024 at 8:02 AM Marco Moock wrote: > > Am 15.02.2024 schrieb Semra Türkkal Nazlımoğlu > : > > > Our bind version seems below. How can we upgrade bind version? > > It comes from the OS you are using. > Upgrade to the current RHEL release. > If you prefer bleeding-edge versions, use Fedora instead. > > > And if we upgrade bind version, is there any problem? > > Install the new OS in a virtual machine and try running BIND there with > your configuration/zones and check for any errors. > In most cases, the upgrade works without any problems. > -- > Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from > this list > > ISC funds the development of this software with paid support subscriptions. > Contact us at https://www.isc.org/contact/ for more information. > > > bind-users mailing list > bind-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/bind-users -- Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND Upgrade
Am 15.02.2024 schrieb Semra Türkkal Nazlımoğlu : > Our bind version seems below. How can we upgrade bind version? It comes from the OS you are using. Upgrade to the current RHEL release. If you prefer bleeding-edge versions, use Fedora instead. > And if we upgrade bind version, is there any problem? Install the new OS in a virtual machine and try running BIND there with your configuration/zones and check for any errors. In most cases, the upgrade works without any problems. -- Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
BIND Upgrade
Hello, Our bind version seems below. How can we upgrade bind version? And if we upgrade bind version, is there any problem? [root@ns2 ~]# named -v BIND 9.11.36-RedHat-9.11.36-11.el8_9 (Extended Support Version) Thanks Semra -- Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
RE: Request to provide procedure for bind upgrade
This is a question about the operating system, not BIND. There are a number of ways. You can enable rollbacks in RPM, you can keep snaphots... you're not going to run into incompatible upgrades in BIND during a simple patching. -- *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences* || \\UTGERS |-*O*- ||_// Biomedical | Ryan Novosielski - Senior Technologist || \\ and Health | novos...@rutgers.edu - 973/972.0922 (2x0922) || \\ Sciences | OIRT/High Perf Res Comp - MSB C630, Newark `' From: bind-users-boun...@lists.isc.org [bind-users-boun...@lists.isc.org] On Behalf Of Sundram Bharti [sundram.bha...@ericsson.com] Sent: Monday, February 16, 2015 10:16 AM To: bind-users@lists.isc.org Subject: Request to provide procedure for bind upgrade Hi Team, My DNS current version is BIND 9.8.4-P1 and OS is Fedora Core release 6 (Zod). So could you let me know. yum update named works for upgrade to current version, if yes then what will be the fall back procedure of upgrade fails? -- BR// Sundram Bharti +919717977886 ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
RE: Request to provide procedure for bind upgrade
Good point. Fedora isn't really a good choice for Production systems - it is bleeding edge with short life cycle (usually new version is out 6 months later and they only support the most recent 2.) Fedora is used as a test bed for what ends up in RHEL later. RHEL has much longer life cycle but requires a paid subscription for updates. CentOS is a binary recompile from RHEL sources that doesn't require a paid subscription. The question is whether you need vendor support for the OS. If yes then RHEL would be the way to go. If not CentOS would work. Note that RHEL6 and CentOS6 are NOT the same as Fedora 6 - they are much later. Also RHEL7 and CentOS7 are out so if you're reloading to new OS you should start with those rather than RHEL6/CentOS6. -Original Message- From: bind-users-boun...@lists.isc.org [mailto:bind-users-boun...@lists.isc.org] On Behalf Of Chuck Anderson Sent: Monday, February 16, 2015 11:17 AM To: Sundram Bharti Cc: bind-users@lists.isc.org Subject: Re: Request to provide procedure for bind upgrade Fedora Core 6 is no longer supported. It went End-Of-Life in 2007: http://en.wikipedia.org/wiki/Fedora_%28operating_system%29#Releases On Mon, Feb 16, 2015 at 10:16:37AM -0500, Sundram Bharti wrote: Hi Team, My DNS current version is BIND 9.8.4-P1 and OS is Fedora Core release 6 (Zod). So could you let me know. _yum update named_ works for upgrade to current version, if yes then what will be the fall back procedure of upgrade fails? ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Request to provide procedure for bind upgrade
Hi Team, My DNS current version is BIND 9.8.4-P1 and OS is Fedora Core release 6 (Zod). So could you let me know. _yum update named_ works for upgrade to current version, if yes then what will be the fall back procedure of upgrade fails? -- BR// Sundram Bharti +919717977886 ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
RE: Request to provide procedure for bind upgrade
The package is “bind” not “named”. The daemon is called “named”. You can type “rpm –qf $(which named)” to determine which package installed that daemon. (Likely it was bind.) Also if you’re running the chroot’ed version you’d want the package “bind-chroot”. I’d suggest you run “rpm –qa |grep –i bind” to see what BIND packages you have installed. Note you should ignore things like “ypbind” if installed as that is part of NIS rather than BIND. You can then do “yum list package” against packages to see if there are newer versions without installing them. e.g. if you saw things like bind-libs, bind-utils, bind, system-config-bind, bind-chroot in the output of “rpm –qa” (it will also show version on these) Do “yum list bind-libs bind-utils bind system-config-bind bind-chroot” which will show you both the installed versions you have and the latest available packages for update in the repository. Ideally you have more than one DNS server and would only update one, test it to be sure everything is working, then update the next one. From: bind-users-boun...@lists.isc.org [mailto:bind-users-boun...@lists.isc.org] On Behalf Of Sundram Bharti Sent: Monday, February 16, 2015 10:17 AM To: bind-users@lists.isc.org Subject: Request to provide procedure for bind upgrade Hi Team, My DNS current version is BIND 9.8.4-P1 and OS is Fedora Core release 6 (Zod). So could you let me know. yum update named works for upgrade to current version, if yes then what will be the fall back procedure of upgrade fails? -- BR// Sundram Bharti +919717977886 ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
BIND upgrade Solaris 10 SPARC
Hi All, I am a newbie in BIND. I want to ask for your help on how to upgrade the BIND version of my DNS. I am using Solaris 10 SPARC and my current BIND version is BIND 9.6.0-P1. I am planning to upgrade to the latest BIND version, BIND 9.7.1-P2. What are the requirements and procedure for the upgrade? If I plan to revert to my old BIND version, what are the steps? Thanks and Regards, Rock ___ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users