Re: [OSL | CCIE_Security] Wireless Dot1x

[Tarik Admani]

Mike,

Where are you saving the profile to? Also my experiences with NAM I typically 
just modify the current running system config file and then hit the repair 
button, sometimes I even restore to bouncing the nam service on the client also.

Thanks,
tArik Admani___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Security] Wireless Dot1x

[Mike Rojas]

Tarik; 

Thank you for your attention to this issue. So I brought a wireless CCIE to 
help me a bit and we found out the issue. PEAP was failing because I had a Typo 
on the authorization ACL on the ISE. 

Once we corrected the typo PEAP worked and I was able to see it working. Just 
CWA and It will be over :).

Just for anyone there, the symptom, it authenticates once, then it keeps asking 
for the credentials even thou ISE says it was successfully authenticated.

Sent from my iPhone

 On Oct 12, 2013, at 9:10 PM, Tarik Admani t_adm...@yahoo.com wrote:
 
 Mike,
 
 Where are you saving the profile to? Also my experiences with NAM I typically 
 just modify the current running system config file and then hit the repair 
 button, sometimes I even restore to bouncing the nam service on the client 
 also.
 
 Thanks,
 tArik Admani
 
 ___
 For more information regarding industry leading CCIE Lab training, please 
 visit www.ipexpert.com
 
 Are you a CCNP or CCIE and looking for a job? Check out 
 www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Security] Wireless Dot1x

[Mike Rojas]

Hello;
I have an issue setting up the profile for the wirless client. I configured the 
Profile using the Anyconnect Profile editor, I save the profile, but when I 
went and did the network repair, only the wired network was showed. 
Another thing (and this is an aside Note for whoever is deploying a Virtual 
WLC) the access points need to be on FlexConnect instead of Local, otherwise 
the AP. wont be able to load the SSIDs, it would be able to join the WLC, but 
not load the configuration. 
Thanks for the help. 
Mike. ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com